Series JP Internationally Approved Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level: 10A 125/250V AC for JPM models & 16A 125/250V AC for JPL models Other Ratings Contact Resistance: 20 milliohms maximum C Insulation Resistance: 1,000 megohms minimum 500V DC Dielectric Strength: 2,000V AC minimum between contacts for 1 minute minimum 4,000V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 25,000 operations minimum Electrical Life: 25,000 operations minimum Nominal Operating Force: JPM Single Pole 3.53N & Double Pole 6.47N JPL Single Pole 4.51N & Double Pole 9.02 N Contact Timing: Nonshorting (break before make) Latchdown: Normal position - flush with barrier latchdown position - .079 (2.0mm) below normal Travel: Pretravel .059 (1.5mm) Overtravel .071 (1.8mm) Total Travel .130 (3.3mm) Materials & Finishes Housing/Frame & Barrier: Polyamide (UL94V-0) Movable Contacts: Silver alloy Interior Seal: Polyphenylene sulfide (UL94V-0) Stationary Contacts: Silver alloy plus copper Case/Base: Melamine (UL94V-0) Terminals: Brass with silver plating Environmental Data Operating Temp Range: 10C through +70C (+14F through +158F) Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Process Seal: Dust resistant inner seal Installation Soldering Time & Temp: Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 for housing/frame, barrier, interior seal, & case/base TV Ratings for UL: JPM (TV-5) Overload Test 125V AC for 50 operations: Steady State Current (rms) 7.5A Minimum Inrush Current (peak) 111A JPM (TV-5) Endurance Test 125V AC for 25,000 operations: Steady State Current (rms) 5A Minimum Inrush Current (peak) 78A JPL (TV-8) Overload Test 125V AC for 50 operations: Steady State Current (rms) 12A Minimum Inrush Current (peak) 163A JPL (TV-8) Endurance Test 125V AC for 25,000 operations: Steady State Current (rms) 8A Minimum Inrush Current (peak) 117A UL: File No. E44145 - Recognized only when ordered with marking on switch. Add /U or /CUL before dash in part number to order UL recognized switch. All JPM models certified at 10A 125V AC, TV5 & JPL models at 16A 125V AC, TV8. VDE: License No. 40028887 - Approved only when ordered with marking on switch. Add /V before dash in part number to order VDE approved switch. All JPM models approved at steady state 5A, inrush 80A, resistive 10A, & motor load 6A all at 250V AC. License No. 40039784 All JPL models approved at steady state 8A, inrush 128A, resistive 16A, & motor load 8A all at 250V AC. C58 www.nkkswitches.com Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesInternationally Approved Pushbuttons Series JP Distinctive Characteristics Industrys first molded pushbutton with TV rating. Designed to handle large inrush current. JPM models certified for TV-5 rating and JPL models for TV-8 rating. C Prominent external insulating barriers increase insulation resistance and dielectric strength. Constructed for dust resistance with interior seal of polyphenylene sulfide (PPS) between actuator and contact area. Specially designed to break light contact welds. Snap-action contact mechanism. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Outer case of heat resistant resin meets ULs 94V-0 flammability standard. Actual Size JPM www.nkkswitches.com C59 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles