JS0308PP4 NKK Switches

Series JS01 & JS03 Ultra-Miniature Slide & Piano DIP General Specifications Electrical Capacity (Resistive Load) Switching Rating: 25mA 24V DC Nonswitching Rating: 0.1A 50V DC Other Ratings Contact Resistance: 50 milliohms maximum Insulation Resistance: 100 megohms minimum 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 2,000 operations minimum Electrical Life: 2,000 operations minimum Total Travel: For slide actuator: .031 (0.8mm) for piano actuator: .114 (2.9mm) Materials & Finishes JS01 Slide DIP JS03 Piano DIP Actuator: Glass fiber reinforced polyamide Glass fiber reinforced PBT Cover: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced PBT (UL94V-0) Base: Glass fiber reinforced polyamide (UL94V-0) Glass fiber reinforced PBT (UL94V-0) Contacts: Beryllium copper with gold plating Phosphor bronze with gold plating Terminals: Brass with gold plating Phosphor bronze with gold plating H Environmental Data Operating Temp Range: 25C through +70C (13F through +158F) Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering Recommended. See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Note: Switches are packaged in OFF position and should be soldered in OFF position. Cleaning: These devices are not process sealed. Hand clean locally using alcohol based solution. Standards & Certifications Flammability Standards: UL 94V-0 rated cover & base The JS series devices have not been tested for UL recognition and CSA certification. These switches are designed for use in a low-voltage, low-current circuit. When used as intended in a low-voltage, low-current circuit, the results do not produce hazardous energy. H18 www.nkk.com Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesUltra-Miniature Slide & Piano DIP Series JS01 & JS03 Distinctive Characteristics Slide type and piano type actuators available. Twin sliding contact mechanism with self-cleaning action (JS01) provides smooth actuation and produces high contact reliability. Gold plated contacts prevent oxidation and sulfide effect and provide stable contact resistance. Use of self-extinguishing UL94V-0 certified material in cover and base provides high arc resistance and high insulation resistance. Slanted terminals ensure secure PCB mounting and prevent dislodging during wave soldering. H Terminal spacing conforms to standard .100 (2.54mm) PCB grid. End-to-end stackable. Actual Sizes JS01 JS03 www.nkk.com H19 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles