JWS11RCAF NKK Switches

Series JWS Internationally Approved Rockers General Specifications B Electrical Capacity (Resistive Load) Power Level: 10A 125/250V AC 6A 125/250V AC (UL/CSA) 5A (3A) 125/250V AC (VDE) Other Ratings Contact Resistance: 10 milliohms maximum Insulation Resistance: 500 megohms minimum 500V DC Dielectric Strength: 2,000V AC minimum between contacts for 1 minute minimum 4,000V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 30,000 operations minimum Electrical Life: 10,000 operations minimum Nominal Operating Force: Single Pole 3.92N & Double Pole 5.39N Angle of Throw: 30 Materials & Finishes Rocker: Polyamide (UL94V-2) Housing/Case: Polyamide (UL94V-0) Movable Contactor: Copper with silver plating Movable Contacts: Silver alloy Stationary Contacts: Silver alloy End Terminals: Brass with silver plating Common Terminals: Copper with silver plating Lamp Terminals: Phosphor bronze with tin plating (illuminated models only) Environmental Data Operating Temp Range: 25C through +70C (13F through +158F) for nonilluminated models 25C through +50C (13F through +122F) for illuminated models Humidity: 90 ~ 95% humidity for 96 hours 40C (104F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 15 minutes 3 right angled directions for 2 hours 2 Shock: 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Sealing: Dust resistant inner seal Installation Soldering: Manual Soldering: See Profile A in Supplement section. Cleaning: These devices are not process sealed. Hand cleaning locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-2 for rocker UL94V-0 for housing/case UL: File No. E44145 All JWS models recognized at 6A 125/250V AC CSA: File No. 023535 0 000 All JWS models certified at 6A 125/250V AC VDE: License No. 119153 All JWS models approved at 5A (3A) 125/250V AC B50 www.nkkswitches.com 9/8/17 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers TogglesInternationally Approved Rockers Series JWS Distinctive Characteristics B Rocker caps and housing available in a variety of colors. Protective barrier available to prevent accidental actuation. Constructed for dust resistance with interior cover of polyamide between actuator and contact area. Easy, crisp actuation. Small size well suited for telecommunication, measuring, automation, and consumer applications. Terminals are molded in to lock out flux, dust, and other contaminants. Outer case of heat resistant resin meets UL94V-0 flammability standard. Actual Size www.nkkswitches.com B51 Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles