CN-0342
New Product
S Series
Dual Seal
Waterproof Toggle
IP68 Rated
2019-04-01 Rev
2018-10-31Series S Waterproof Toggles
General Specifications
Electrical Capacity (Resistive Load)
Power Level: Shown in following tables
Other Ratings
Contact Resistance: 10 milliohms maximum
Insulation Resistance: 1,000 megohms minimum @ 500V DC
Dielectric Strength: 2,000V AC minimum for 1 minute minimum
Mechanical Life: 50,000 operations minimum for S1AWB, S2AWB, S3AWB, S6AWB, S7AWB, S21AWB
30,000 operations minimum for S5AWB, S8AWB, S25AWB, S28AWB
Electrical Life: 25,000 operations minimum
Angle of Throw: Shown in following tables
Environmental Data
Operating Temperature Range: 30C through +70C (22F through +158F)
Sealing: Waterproofing, achieved with boot at base of lever plus o-rings inside and outside of bushing,
meets IP68 of IEC60529 Standards (dust tight and protection against effects of temporary
immersion). See further explanation on last page.
Processing
Soldering: Manual Soldering: 390C for 4 seconds, 2 cycles
Distinctive Characteristics
Dual protection with internal o-ring and external rubber washer, sealing
the switch to achieve IP68 of IEC60529 Standards (dust tight and
water protected against immersion for as long as 30 minutes, in 1.5
meters of water).
Additional panel seal security against wet environments provided by
waterproof boot at base of toggle.
Fluid actuation delivered in smooth, sturdy tactile feel.
Sleek design incorporates functionality with polished, chrome-plated
actuator paired with waterproof boot.
Superb quality and construction design prohibit entry of foreign
particles that may otherwise compromise lever operation.
2 www.nkkswitches.com