R07 Miniature Series 07 General Purpose Regulator 1/8 and 1/4 Port Sizes l Compact design l Full flow gauge ports l Low torque, non-rising adjusting knob l Snap action knob locks pressure setting when pushed in l Standard relieving models allow reduction of outlet pressure even when the system is dead-ended l Can be disassembled without the use of tools or removal from the air line Technical Data Ordering Information Fluid: Compressed air See Ordering Information on the following Maximum pressure: 20 bar (300 psig) pages. Operating temperature: -20 to +65C (0 to +150F) * * Air supply must be dry enough to avoid ice formation at temperatures below +2C (+35F). Typical flow at 10 bar (150 psig) inlet pressure, 6,3 bar (90 psig) set pressure and a droop of 1 bar (15 psig) from set: 3 1/8 ports: 6,5 dm /s (14 scfm) 3 ISO Symbols 1/4 ports: 7 dm /s (15 scfm) Gauge ports: 1/8 PTF with PTF main ports 1/8 ISO Rc with ISO Rc main ports 1/8 ISO Rc with ISO G main ports Materials: Body: Zinc Relieving Non relieving Bonnet: Acetal Valve: Brass/nitrile Valve seat: Acetal Elastomers: Nitrile Our policy is one of continuous research and development. 7/97 N/AL.8.300.200.01 We reserve the right to amend, without notice, the specifications given in this document.R07 Typical Performance Characteristics FLOW CHARACTERISTICS PORT SIZE: 1/4 INLET PRESSURE: 10 bar g (150 psig) 8 RANGE: 0,3 to 7 bar (5 to 100 psig) 100 6 80 60 4 40 2 20 0 0 3 02 4 6 810 dm /s 0 4 8 12 16 20 24 scfm AIR FLOW Ordering Information. Models listed include ISO G threads, relieving diaphragm, 0,3 to 7 bar (5 to 100 psig) outlet pressure adjustment range* without gauge. 3 Port Size Model Number Flow dm /s (scfm) Weight kg (lbs) G1/8 R07-100-RNKG 6,5 (14) 0,19 (0.31) G1/4 R07-200-RNKG 7 (15) 0,19 (0.31) Approximate flow at 7 bar (100 psig) inlet pressure, 6.3 bar (90 psig) set pressure and a droop of 1 bar (14.5 psig) from set. Alternative Models R 0 7 - H H H - H H H H Port Size Substitute Threads Substitute 1/8 1 PTF A 1/4 2 ISO Rc taper B ISO G parallel G Option Substitute Outlet Pressure Adjustment Ranges* Substitute Not applicable 0 0,1 to 0,7 bar (1 to 10 psig) A Option Substitute 0,3 to 3,5 bar (5 to 50 psig) E Standard 0 0,3 to 7 bar (5 to 100 psig) K Low flow seat 2 0,3 to 10 bar (5 to 150 psig) M** H.P. unit, 10 bar (150 psig) 5** Gauges Substitute * Outlet pressure can be adjusted to pressures in excess of, and less With G than, those specified. Do not use these units to control pressures Without N outside of the specified ranges. Diaphragm Substitute ** When specifying 10 bar (150 psig) unit, eg. R07-205-RNMG, also Relieving R note correct code at 6th digit. Non relieving N Accessories Wall Mounting Bracket and Tamper Resistant 40 mm Panel Nut for P1H Unit Panel Nut Field Modification Pressure Gauge R1/8 Connection 1/8 PTF Connection Plastic: 18-025-003 Plastic: 2962-89 Knob and screw: 18-001-092 2 bar (30 psig): 18-013-214 Metal: 2962-04 Screw only: 6097-08 4 bar (60 psig): 18-013-990 18-013-211 10 bar (150 psig): 18-013-989 18-013-212 25 bar (350 psig): 18-013-908 Our policy is one of continuous research and development. N/AL.8.300.200.02 7/97 We reserve the right to amend, without notice, the specifications given in this document. OUTLET PRESSURE psig bar g