PRODUCT DATASHEET SynJet ZFlow 75 Cooler SynJet cooling technology provides the most reliable thermal management solution available. This LED cooler has been developed by Nuventix for cooling tracklight, spotlight, and recessed downlight modules. 4 Cools up to 38 W 5 yr Warranty Reliable 100K Hours Lifetime Small Form Factor Energy Efficient Quiet Low Acoustics 1 Specifications Thermal & Acoustic 2 3 4 5 SynJet Setting s-a TDP (W) SPL (dBA) Wire Connections Red to +VDC High Performance 0.80 38 28 Black & Blue to Ground Red to +VDC Mid Performance 0.91 33 25 Black & Purple to Ground Red to +VDC Standard Performance 0.97 31 22 Black only to Ground Red to +VDC PWM at 100% duty cycle 0.80 38 28 Black only to Ground Blue to PWM Signal Electrical 6 6 Current (mA) Current (mA) Voltage Voltage 2 SynJet Setting (VDC) Pavg (VDC) Pavg +/- 10% Imin Iavg Ipeak (mW) +/- 10% Imin Iavg Ipeak (mW) High Performance 66 132 330 46 92 550 Standard 51 102 255 38 76 455 5 20 12 10 Silent 44 88 220 30 60 360 PWM at 100% duty cycle 66 132 330 46 92 550 Environmental All Settings Min Max Units Conditions Operating Temperature -40 85 C Air temperature surrounding cooler Storage Temperature -50 95 C Air temperature surrounding cooler Storage Altitude 15K m Above sea level Operating Relative Humidity 5 95 % Non-condensing Weight 85 g SynJet only Reliability 100K hrs L10 60 C Regulatory Compliance RoHS, UL, FCC Part 15 Class B, CE 1 All values are typical at 25C unless otherwise stated. 2 The Level Select model should be used for discrete performance settings. Follow the instructions in the Product Design Guide for adjusting settings. 3 Thermal resistance values are given as reference only and are measured in free air without airflow obstructions. Thermal resistance is measured from the bottom 2 middle of the heat sink to ambient air measured at the inlet to the SynJet, with a heat source at least 19cm using the 38W spot cooler reference heat sink. Actual thermal performance may vary by application and final product design should be tested to assure proper thermal performance. 4 Thermal Design Power is based on a 30C temperature rise of heat sink mounting surface above ambient temperature around cooler. 5 Sound Pressure Level is measured at 1 meter distance per ISO 7779. 6 The SynJet has a time varying current. The current waveform is sinusoidal and the average current (Iavg) is used to calculate the average power consumption (Pavg) at nominal input voltage (VDC). See the Electrical section in the Product Design Guide for a detailed explanation. 4635 Boston Lane Phone: 512-382-8101 MKTG-DOC-00106 A01 Austin, TX 78735 www.nuventix.com Revision Feb 2011 PRODUCT DATASHEET Mechanical SynJet Cooling Solution All dimensions are nominal and in mm unless otherwise stated. See product drawings for more detail. SynJet Wire Harness Connector Pinout Pin Wire Color Symbol Description 1 Red +VDC 5 V or 12 V depending on model 2 Black GND Ground Input for Level Select model 3 Purple CTRL2 Status signal for PWM model Input for Level Select model 4 Blue CTRL1 PWM input for PWM model Part Numbers Part Number Description Notes SSLCS-CM005-001 Configurable to discrete performance settings SynJet, ZFlow 75, PWM, 5V, Black SSLCS-CM005-002 Use with PWM input to control performance setting SynJet, ZFlow 75, Level Select, 5V, Black SSLCS-CM012-001 Configurable to discrete performance settings SynJet, ZFlow 75, PWM, 12V, Black SSLCS-CM012-002 Use with PWM input to control performance setting SynJet, ZFlow 75, Level Select, 12V, Black WALLS-C4150-001 Wire Harness, 4-Wire, 150 mm Length Contact sales for other wire harness options WALLS-C4600-001 Wire Harness, 4-Wire, 600 mm Length Contact sales for other wire harness options Nuventix reserves the right to make changes to the products or information contained herein without notice. No liability is assumed as a result of their use or applications. For additional information, please contact Nuventix directly. 4635 Boston Lane Phone: 512-382-8101 MKTG-DOC-00106 A01 Austin, TX 78735 www.nuventix.com Revision Feb 2011