DC002-10E DC002-10E High Voltage, Low Power 5V Regulator Features: 5 V Regulated Output Input Voltage to 36 VDC (Maximum Rating 45 VDC) Reverse Battery Protection Excellent Immunity to Transients and ESD High Temperature Operation Small, Low Profile Surface Mount Package Applications: Industrial Sensors and Controls Automotive Sensors and Controls Description: DC-Series voltage regulators are designed for harsh, noisy environments where immunity to large voltage transients and high input voltages are required. These regulators protect sensitive electronic components while providing a stable regulated supply. They are rated for high temperature operation, up to 170C. The low-profile small footprint package features an exposed die-attach pad for direct heat sinking to the circuit board. Electrical characteristics: (40C to +175C, unless otherwise noted) Parameter Min Typ. Max Units Input Voltage 6.2 36 V Output Voltage 4.5 5 5.5 V Output Current 20 mA Bias Current at Zero Output Current 900 A Absolute maximum ratings*: Parameter Limit Input Voltage 45 V Reverse Battery Voltage 60 V Output Current 25 mA Junction Temperature, T 40 C to +170 C J Storage Temperature 65C to +170C *Stresses beyond those listed under Absolute maximum ratings may cause permanent damage to the device. These are stress ratings only functional operation of the device at these or any other conditions beyond those indicated under Electrical characteristics is not implied. Notes: 1. Junction-to-air thermal resistance for the TDFN6 package in free air is 320C/Watt. Soldering the package to a PCB, including the die attach paddle, improves temperature performance substantially. The input voltage and output current are limited by thermal power dissipation at the package. 2. Due to the small package size, the TDFN6 package has a three-letter code to designate part type. NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 (952) 829-9217 www.nve.com DC002-10E Part Numbers and Configurations: Regulated Package Part Number Output Voltage Package Marking DC002-10E 5V TDFN6 FFCe Package Drawing: 2.00 0.05 0.80 MAX 4 6 4 6 C0.10 PIN 1 ID 1 3 3 1 0.30 0.05(6x) 0.65 TYP. (4x) 0.30 0.05(6x) 2.50 0.10 0.0-0.05 1.30 REF (2X) PIN 1 INDEX AREA 0.20 REF. Dimensions in mm (inches). Pin Configuration: Vreg (Out) No Connect DC002-10E No Connect Ground VCC (In) No Connect Note: The die attach pad is exposed on the back of the package. NVE recommends that it be connected to the ground pin and the PCB to improve thermal performance. NVE Corporation 11409 Valley View Road, Eden Prairie, MN 55344-3617 (952) 829-9217 www.nve.com 2.50 0.10 1.30 0.05