ANGLED TROUGH A NEW ANGLE ON PULLING WIRES The new Hoffman Angled Trough cuts total installation time by 80%. It eliminates the need for costly 90-degree conduit bends and offers flexibility for wire distribution, making it a time and cost saving solution for contractors. The Angled Trough is the enclosure that alleviates the labor, time, cost, and manpower it takes to make 90 degree conduit bends down to a large MCC center, and allows us to meet our job deadlines much easier. Greg Bills, Sr. Applications Engineer Walker Industrial APPLICATIONS: FEATURES: Wire distribution, junctions and terminations in a variety of Flexible install allows conduit runs through six sides indoor commercial applications. The Angled Trough is suitable of enclosure, including the front for applications above, below or to the side of electrical panels Patented* angled design does not take up valuable real in electrical rooms, above modular ceilings, and as a more estate on the wall flexible alternative to the traditional trough. Easy mounting via holes on the back of the enclosure Unique design is easy to assemble and offers a removable cover MEASURABLE SAVINGS: Shipped completely assembled with no end caps to install No need to buy expensive 90-degree conduits, pre-fab or bend conduits at job site Faster cover install with only half the number of screws *U.S. Patent 9,178,342B2 HOFFMAN ENCLOSURES ANGLED TROUGH A NEW ANGLE ON PULLING WIRES ANGLED TROUGH BULLETIN F40AT Catalog Model AxBxC in AxBxCmm Max. Conduit Max. Conduit No. of Cover Number Code Size in Size mm Screws AT6612 35585 6 x 6 x 12 152 x 152 x 305 1.25 32 1 AT6618 35586 6 x 6 x 18 152 x 152 x 455 1.25 32 2 AT6624 35587 6 x 6 x 24 152 x 152 x 610 1.25 32 2 AT6636 35588 6 x 6 x 36 152 x 152 x 914 1.25 32 3 AT6648 35592 6 x 6 x 48 152 x 152 x 1219 1.25 32 4 AT6660 35593 6 x 6 x 60 152 x 152 x 1524 1.25 32 5 AT6672 35594 6 x 6 x 72 152 x 152 x 1829 1.25 32 6 AT8824 35595 8 x 8 x 24 203 x 203 x 610 2 51 2 AT8836 35596 8 x 8 x 36 203 x 203 x 914 2 51 3 AT8848 35597 8 x 8 x 48 203 x 203 x 1219 2 51 4 AT8860 35598 8 x 8 x 60 203 x 203 x 1524 2 51 5 AT8872 35602 8 x 8 x 72 203 x 203 x 1829 2 51 6 AT101024 35604 10 x 10 x24 254 x 254 x 610 3 76 2 AT101036 35605 10 x 10 x 36 254 x 254 x 914 3 76 3 AT101048 35606 10 x 10 x 48 254 x 254 x 1219 3 76 4 AT121224 35607 12 x 12 x 24 305 x 305 x 610 3 76 2 AT121236 35608 12 x 12 x 36 305 x 305 x 914 3 76 3 AT121248 35612 12 x 12 x 48 305 x 305 x 1219 3 76 4 AT121260 35613 12 x 12 x 60 305 x 305 x 1524 3 76 5 AT121272 35614 12 x 12 x 72 305 x 305 x 1829 3 76 6 WWW.PENTAIRPROTECT.COM/HOFFMAN NORTH AMERICA SOUTH AMERICA EUROPE MIDDLE EAST & INDIA ASIA Minneapolis, MN Sao Paulo, Brazil Straubenhardt, Germany Dubai, United Arab Emirates Shanghai, P.R. China Tel: +1.763.421.2240 Tel: +55.11.5184.2100 Tel: +49.7082.794.0 Tel: +971.4.378.1700 Tel: +86.21.2412.6943 Mexico, D.F. Boitura, Brazil Dzierzoniow, Poland Bangalore, India Singapore Tel: +52.55.5280.1449 Tel: +55.15.3363.9148 Tel: +48.74.64.63.900 Tel: +91.80.6715.2001 Tel: +65.6768.5800 Toronto, Canada Lainate, Italy Shin-Yokohama, Japan Tel: +1.416.289.2770 Tel: +39.02.932.7141 Tel: +81.45.476.0271 Aachen, Germany Seoul, Korea Tel: +49.2405.40996.0 Tel: +82.2.2129.7755 Qingdao Tel: +86.532.8771.6101 Pentair and Hoffman are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. 2017 Pentair. HOFFMAN ENCLOSURES ANGLED TROUGH A NEW ANGLE ON PULLING WIRES SEL-00263 A