C-DR3P24 nVent

Spec-00186 Panel Conversion Kit adapts enclosure for mounting standard coNce PT PANel c oN versioN Ki T NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar stud. Kit includes four adapter plates and hardware for mounting panel. Bulletin: c WY Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than 30.00 x 30.00 in. (762 x 762 mm) Swing-Out Rack Frames provide 120-degree swing-out access for s wi Ng- o u T rA c K Fr Ame 19-in. rack equipment. Welded rack frame mounts to front flange. Distance from frame to door surface is 1.32 in. (33 mm) for solid doors and 1.07 in. (27 mm) for window doors. Frame is painted white. Mounting hinge and latching hardware provided. Order separately clip nut package catalog number XNM5 and screws XSM5 (metric) or AN1032 and screws AS1032 (English). Swing-Out Rack Frame cannot be mounted on adjustable mounting kit. Bulletin: c WY Catalog Number Material Fits Enclosure A x B CSF2424 Painted steel 24.00 x 24.00 in. (610 x 610 mm) CSF3024 Painted steel 30.00 x 24.00 in. (762 x 610 mm) CSF3624 Painted steel 36.00 x 24.00 in. (914 x 610 mm) enclosure. Kits include slide mechanisms and hardware. Use two coNce PT Adjus TAble- de PTh mouNT i Ng Ki Ts kits when enclosure has six collar studs for mounting panel. Kit catalog numbers ending in 2 contain two slide mechanisms catalog numbers ending in 4 contain four slide mechanisms. Dead Front Panel and Swing-Out Rack Frame cannot be mounted on adjustable mounting kit. Bulletin: c WY Fits CONCEPT Fits CONCEPT Catalog Number Enclosure (in.) Enclosure (mm) CAM64 when C = 6.00 when C = 152 CAM82 when C = 8.00 when C = 203 CAM84 when C = 8.00 when C = 203 CAM102 when C = 10.00 when C = 254 CAM104 when C = 10.00 when C = 254 CAM122 when C = 12.00 when C = 305 CAM124 when C = 12.00 when C = 305 CAM162 when C = 16.00 when C = 406 CAM164 when C = 16.00 when C = 406 CAM202 when C = 20.00 when C = 508 CAM204 when C = 20.00 when C = 508 Adjustable-Depth Mounting Kits provide mounting means for installing panels, swing-out panels, DIN rails, rack angles, mounting channels or grid straps at any depth from front to rear of Use to mount CONCEPT, Networking and wall-mount enclosures P ol e- mouN T K i T to poles of various sizes and shapes. Simply attach the plated steel channel bar to the mounting holes at the back of the enclosure and wrap the stainless steel strap around the pole and through the bar. Kit includes two mounting channels, two straps suitable for 3-in. (76-mm) to 12-in. (305-mm) diameter pole and mounting hardware. Bulletin: c WY Catalog Number Fits Enclosure (in.) Fits Enclosure (mm) CPMK12 when B = 12.00 when B = 305 CPMK16 when B = 16.00 when B = 406 CPMK20 when B = 20.00 when B = 508 CPMK24 when B = 24.00 when B = 610 CPMK30 when B = 30.00 when B = 762 1 Accessories SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00186 O Mounting Channels provide mounting framework for installing mouN T i Ng c h A NNel s DIN rails and grid straps at various positions within the enclosure. Channels can be mounted vertically or horizontally to collar studs or to the slide mechanisms of the adjustable-depth mounting kit. Kit includes two channels. Bulletin: c WY Catalog Number Fits CONCEPT Enclosure CMC12 when A or B = 12.00 in. (305 mm) CMC16 when A or B = 16.00 in. (406 mm) CMC20 when A or B = 20.00 in. (508 mm) CMC24 when A or B = 24.00 in. (610 mm) CMC60 when A or B = 60.00 in. (1524 mm) Rack-Mount Angles are a mounting means for 19-in. rack r A c K-mouN T A Ngl e s equipment in 24-in. wide enclosures. L-shaped through-hole angles attach to enclosure flange or the adjustable-depth mounting kit. Holes are .281 in. (7 mm) in diameter. Clear plated 14 gauge steel construction. Mounting hardware included. Order separately clip nut package catalog number XNM5 and screws XSM5 (metric) or AN1032 and screws AS1032 (English). Bulletin: c WY Catalog Number Fits CONCEPT Enclosure Rack Units CRA12TH when A = 24.00 in. (610 mm) 12 CRA16TH when A = 30.00 in. (762 mm) 16 DIN3 Rail Kits supply mounting surfaces for DIN mount snap-on di N3 rA il Ki Ts devices in either DIN 1, DIN 3 or CENELEC styles. Rails attach vertically or horizontally to rear collar stud or to mounting channels. Kit includes three rails and mounting hardware. Bulletin: c WY Catalog Number Fits CONCEPT Enclosure CDR3P12 when A or B = 12.00 in. (305 mm) CDR3P16 when A or B = 16.00 in. (406 mm) CDR3P20 when A or B = 20.00 in. (508 mm) CDR3P24 when A or B = 24.00 in. (610 mm) EQUIPMENT PROTECTION PH 763.422.2211 FAX 763.422.2600 PentAirProtect.com Accessories 2 Spec-00186 O