P-19RP6UP nVent

PROLINE INt ERNa L COm PONENts Rac-k Mount a ngles and a ccesso Ries 7F7S66pec-330..0444223223..22621010 mO du La R ENCLOsu RE s yst Ems PROLINE INt ERNa L COm PONENts Ra C-k mO u Nt aN g LEs a Nd aCCE ss ORIEs PROLINE RaCk aN g LEs Ov ERv IEw Rack Angles can be mounted directly to the enclosure frame or on grid system straps at almost any depth location. Rack Angles are plated. All mounting hardware to install Rack Angles is included. (Order cage nuts for square hole Rack Angles separately.) The standard rack angle position is 44 mm behind the door opening. Rack Angles can be moved forward if desired. Deeper positions require the use of grid straps. 1200-mm and 1600-mm frames require center uprights to mount Rack Angles in right bay or left bay. For joining cabinets with Rack Angles in the full forward position, use Joining Kit PJ2FF. Shelves, drawer, guides and pull-out shelves require two sets of Rack Angles or frame accessory brackets installed in the frame. PROLINE Rack Angles are available in 19-, 23- and 24-in. static Load Notes configurations. All Rack Angles have two mounting surfaces that It is important to comply with manufacturers recommendations for serve as mounts for both rack equipment and rack accessories. rack mounting support. Rack Angles are furnished in pairs and are available with tapped Follow mounting directions for individual equipment. holes that directly accommodate 10-32 screws or square holes Max. 20 lb. (9.1 kg) per rack unit for equipment under 20-in. (508- for use with cage nuts and M5, M6 or 10-32 screws. Rack Angles mm) deep. comply with ANSI/EIA RS-310-D rack mounting standards. Equipment over 20-in. (508-mm) deep or over 20 lb. (9.1 kg) per rack unit requires rear support. 19-IN. RaCk aN g LEs 19-in. U-Shaped Rack Angles are Catalog Number Hole H (mm) H (in.) Fits Frame Rack Units available in square-hole and tapped- PRA197TH Square 578 22.77 700 mm 13 hole designs. Tapped Rack Angles PRA197TP Tapped 578 22.77 700 mm 13 are 12 gauge plated steel with 10-32 PRA198TH Square 712 28.02 800 mm 16 tapped holes. Square-Hole Rack PRA198TP Tapped 712 28.02 800 mm 16 Angles are 14 gauge plated steel PRA1914TH Square 1290 50.77 1400 mm 29 designed to accept metric or English PRA1914TP Tapped 1290 50.77 1400 mm 29 cage nuts. 19-in. Rack Angles are PRA1916TH Square 1467 57.77 1600 mm 33 fixed directly into a 600-mm wide PRA1916TP Tapped 1467 57.77 1600 mm 33 enclosure frame. To mount 19-in. PRA1918TH Square 1690 66.52 1800 mm 38 Rack Angles in 700- or 800-mm PRA1918TP Tapped 1690 66.52 1800 mm 38 wide frames, use frame reducing PRA1920TH Square 1867 73.52 2000 mm 42 brackets. PRA1920TP Tapped 1867 73.52 2000 mm 42 PRA1922TH Square 2090 82.27 2200 mm 47 Bulletin: p 20 PRA1922TP Tapped 2090 82.27 2200 mm 47 Vertical holes spaced in 1.75-in. (44.5-mm) increments. 1 mO du La R ENCLOsu RE s yst Ems SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00433 FPROLINE INt ERNa L COm PONENts Rac-k Mount a ngles and a ccesso Ries 23-IN. RaCk aN g LEs 23-in. Rack Angles are available Height for telecom applications. They fit Catalog Number Hole mm/in. Fits Frame Height Rack Units directly into 700-mm wide frames PRA237TP Tapped 584 700 mm or taller 13 or into 800-mm wide frames using 22.99 frame reducing brackets. Rack PRA2314TP Tapped 1270 1400 mm or taller 29 Angles are 12 gauge steel with 10-32 50.00 tapped holes. 23-in. Rack Angles are PRA2316TP Tapped 1473 1600 mm or taller 33 available with 1.00-in. vertical hole 57.99 spacing. PRA2318TP Tapped 1676 1800 mm or taller 38 65.98 Bulletin: p 20 PRA2320TP Tapped 1879 2000 mm 42 73.98 Vertical holes spaced in 1.00 in. (25.4mm) increments. 24-IN. RaCk aN g LEs 24-in. Rack Angles are available in Catalog Number Hole H (mm) H (in.) Fits Frame Rack Units both square-hole and tapped-hole PRA247TP Tapped 578 22.77 700 mm 13 designs. Tapped Rack Angles are 12 PRA2414TH Square 1245 49.02 1400 mm 29 gauge plated steel with 10-32 tapped PRA2416TH Square 1467 57.77 1600 mm 33 holes. Square-Hole Rack Angles are PRA2416TP Tapped 1467 57.77 1600 mm 33 14 gauge plated steel designed to PRA2418TP Tapped 1690 66.52 1800 mm 38 accept metric or English cage nuts. PRA2420TH Square 1867 73.52 2000 mm 42 24-in. Rack Angles fit directly into PRA2420TP Tapped 1867 73.52 2000 mm 42 700- or 800-mm wide frames using PRA2422TH Square 2090 82.27 2200 mm 47 frame reducing brackets. PRA2422TP Tapped 2090 82.27 2200 mm 47 Bulletin: p 20 Vertical holes spaced in 1.75-in. (44.5-mm) increments. EQUIPMENT PROTECTION SOLUTIONS PH 763.422.2211 FAX 763.422.2600 HOFFMANONLINE.COM mO du La R ENCLOsu RE s yst Ems 2 Spec-00433 F