Free-Stand Cabinet S PROLINE Acc Ess ORIEs 77IS66pec-330..0442221222..22656818 n etworking Free-Santd Cabinet S Pr OLine aCC e SSOrie S Permits joining two enclosure frames while maintaining an Frame Joining k it S environmental seal. Side-to-Side Joining k it consists of six frame nuts and screws, as well as gasket material to maintain a dust-tight and water-tight seal between ganged frames. Can be used if rack angles are not in the front or rearmost positions or if a subpanel is not in the rearmost position. a lternate Joining k it consists of three standoffs, six frame nuts and screws, as well as gasket material. This kit facilitates frame joining when rack angles are in the front or rearmost position, or if a subpanel is in the rearmost position. Front-to-b ack Joining k it permits front-to-back joining of two single-bay enclosures. This kit does not fit 1200-mm or 1600-mm wide frames. Bullet In: p 20, p 20e M Catalog Number Description PJ2F Standard Frame Joining, Side-to-Side PJ2FD Standard Frame Joining, Side-to-Side, Non-gasketed PJ2FHF2 EMC Standard Frame Joining, Side-to-Side PJ2FF Alternate Frame Joining, Side-to-Side PJ2FBF Frame Joining, Front-to-Back 1 n etworking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION SOLUTIONS Spec-00212 IFree-Stand Cabinet S PROLINE Acc Ess ORIEs L Joining b ra Cket The L Joining Bracket, made of 10 Catalog Number Description gauge steel, is used in conjunction PJB2F L Joining Bracket with the standard joining kit as additional support. Pictured hardware is included. Bullet In: p 20 Frame Feet Four die-cast feet for use on the Catalog Number Description bottom of PROLINE frames that PFFM12 Frame Feet raise the frame 9 mm. Bullet In: p 20 t oo L-LeSS (Snap-in) bL anking p ane LS For 19-in. r aCk S These Tool-less 19-in. Blanking Rack Pkg. Panels provide easy tool-less Catalog Number Description Units Fits Qty. installation and ensure proper D19BPT1RU Blanking Panel, 19 in. 1 19 in., universal rack spacing, 10 airflow to equipment. Made of black tapped or square holes composite material and can be used D19BPT2RU Blanking Panel, 19 in. 2 19 in., universal rack spacing, 10 with tapped or square EIA universal tapped or square holes spaced rack mounting angles. Bullet In: DA cc Y Leve Ler S Four post-type levelers allow Catalog Number Description adjustment for uneven floors. PLM12 Post-type Levelers Levelers can be attached to the bottom of a frame or to a 0-mm solid base. Levelers are plated and the leveler base is capped with plastic to provide resistance to marring. Adjustable for 17-mm to 35-mm height. Ball and socket construction. Four levelers will support a maximum of 453.6 kg (1000 lb.). Bullet In: p 20 EQUIPMENT PROTECTION SOLUTIONS PH 763.422.2661 FAX 763.422.2588 HOFFMANONLINE.COM n etworking 2 Spec-00212 I