VEN260HC-4.80T2L nVent

Series 260HC Card Lok Series 260HC Card Lok RECOMMENDED GAP WIDTH PCB + 7.62 mm (.300 in) RECOMMENDED TORQUE 68 N-cm (6 in-lbs) With option 90 N-cm (8 in-lbs) COLD PLATE WEIGHT .95 g/cm (.085 oz/in) MATERIALS AND FINISH BODIES AND WEDGES Material: Aluminum alloy 6061-T6 per per ASTM- B221 or AMS-QQ-A-200/8 Finish: See finish table on opposite page RECOMMENDED GAP: SHAFT BOARD MODULE ASSEMBLY THICKNESS PLUS 7.62 .300 Material: Alluminum alloy 7075-T6 per ASTMB221 or AMS-QQ-A-200/11 ROLL PIN Finish: BOARD MODULE ASSEMBLY See finish table on opposite page SCREW .09-in. or 2.5-mm hex. socket head SHAFT MAY BE RIVETED OR SCREWED Material: ONTO BOARD MODULE ASSEMBLY 300 series stainless steel with dry film lube per MIL-L-46010 LOCK WASHER Material: MS35338-135 Finish: Passivated per AMS2700 INDEXING PIN (INSTALLED ONTO SHAFT) ROLL PINS WEDGES ROLL PIN Material: 400 series stainless steel FLAT WASHER Finish: Passivated per AMS2700 LOCK WASHER SCREW INDEXING PIN Material: Aluminum Alloy 6061-T6 Finish: See finish table on opposite page pentairprotect.com 1-800-854-7086 Series 260HC Card Lok 8.9 5.8 (.35) (.23) REF 4.65 (.183) Lock element per 5.72 Unlocked Locked MIL-F-18240 (.225) applied to thread of screw Detail V Detail L Provides prevailing torque for resistance to Provides visual lock indication loosening from shock and vibration. Adds 22 N-cm (2 in-lbs) torque to assembly. 5.334 CENTER HOLE LOCATION OPTION ONLY (.210) 6.350 6.858 MAX (.250) (.270 MAX) + 0.127 1.016 - 0.025 + .005 .040 - .001 20.320 M/2 .13 (.005) (.800) M = PN CODE LENGTH - 48.26 (1.90) .13 (.005) ASSEMBLY LENGTH PN CODE LENGTH + 2.54 (.100) 12.460 (.491) 8.255 MAX (.325 MAX) ONE THREADED HOLE AND INDEXING PIN STANDARD 1.575 EXTRA THREADED HOLE WITH OPTION (.062) INDEXING PIN FINISH TABLE Part Number Code Code Series 260HC Card-Lok Five Piece Letter Finish M V A 260HC - 3.80 E H L A Black Anodize per Mil-A-8625 Type II, Class 2 Prefix options HA Hard Black Anodize per Mil-A-8625 Type III, Class 2 Metric Screw Head M2.5 Hex Drive M Standard Screw Head 3/32 Hex Drive blank EN Electroless Nickel per Mil-C-26074 Class 4, Grade B, Bright Visual Indicator V No Visual Indicator blank Black Anodize A or choose from Finish Table see table MOUNTING METHOD TABLE Suffix options Code Length in 12.7 (.50) increments 96.52 (3.80) Letter Method to 172.72 (6.80) H 1.73/1.85 (.068/.073) dia. through holes countersink Additional Center Mounting Hole E None blank 100 x 1.50 (.060) deep T0 0-80 tapped hole Mounting Options - through mounting holes H T2 2-56 tapped hole or choose from Mounting Option Table see table TM2 M2 x 0.40 tapped hole Lock Element L TM2.5 M2.5 x 0.45 tapped hole None blank Part Number Code Example: MVA260HC-3.80ET2L Series 260HC Card-Lok five piece 96.52 (3.80) long black anodized with M2.5 hex drive, visual indicator, mounting holes tapped for 2-56 thread, with locking element. pentairprotect.com 1-800-854-7086