INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT4351 8-channel analog multiplexer/demultiplexer with latch December 1990 Product specication File under Integrated Circuits, IC06Philips Semiconductors Product specication 8-channel analog 74HC/HCT4351 multiplexer/demultiplexer with latch FEATURES The 74HC/HCT4351 are 8-channel analog multiplexers/demultiplexers with three select inputs (S to 0 Wide analog input voltage range: S ), two enable inputs (E and E ), a latch enable input 2 1 2 5 V (LE), eight independent inputs/outputs (Y to Y ) and a 0 7 Low ON resistance: common input/output (Z). 80 (typ.) at V - V = 4.5 V CC EE With E LOW and E is HIGH, one of the eight switches is 1 2 70 (typ.) at V - V = 6.0 V CC EE selected (low impedance ON-state) by S to S . The data 0 2 60 (typ.) at V - V = 9.0 V CC EE at the select inputs may be latched by using the active Logic level translation: to enable 5 V logic to LOW latch enable input (LE). When LE is HIGH the latch communicate with 5 V analog signals is transparent. When either of the two enable inputs, E (active LOW) and E (active HIGH), is inactive, all 8 1 2 Typical break before make built in analog switches are turned off. Address latches provided V and GND are the supply voltage pins for the digital CC Output capability: non-standard control inputs (S to S , LE, E and E ). The V to GND 0 2 1 2 CC I category: MSI CC ranges are 2.0 to 10.0 V for HC and 4.5 to 5.5 V for HCT. The analog inputs/outputs (Y to Y , and Z) can swing 0 7 between V as a positive limit and V as a negative CC EE GENERAL DESCRIPTION limit. The 74HC/HCT4351 are high-speed Si-gate CMOS V - V may not exceed 10.0 V. CC EE devices. They are specified in compliance with JEDEC standard no. 7A. For operation as a digital multiplexer/demultiplexer, V is EE connected to GND (typically ground). QUICK REFERENCE DATA V = GND = 0 V T =25 C t =t = 6 ns EE amb r f TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC HCT t / t turn ON time E , E or S to V C = 15 pF R =1 k V = 5 V 2735ns PZH PZL 1 2 n os L L CC t / t turn OFF time E , E or S to V 21 23 ns PHZ PLZ 1 2 n os C input capacitance 3.5 3.5 pF I C power dissipation capacitance per switch notes 1 and 2 25 25 pF PD C max. switch capacitance S independent (Y) 5 5 pF common (Z) 25 25 pF Notes 2. For HC the condition is V = GND to V 1. C is used to determine the dynamic power I CC PD For HCT the condition is V = GND to V - 1.5 V dissipation (P in W): I CC D 2 ) 2 P =C V f + (C + C V f D PD CC i L S CC o where: ORDERING INFORMATION f = input frequency in MHz i See 74HC/HCT/HCU/HCMOS Logic Package f = output frequency in MHz Information. o C = output load capacitance in pF L C = max. switch capacitance in pF S ) 2 (C + C V f = sum of outputs L S CC o V = supply voltage in V CC December 1990 2