74HC4852PW-Q100,11 NXP

74HC4852-Q100 74HCT4852-Q100 Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control Rev. 1 12 July 2012 Product data sheet 1. General description The 74HC4852-Q100 74HCT4852-Q100 are high-speed Si-gate CMOS devices and are specified in compliance with JEDEC standard no. 7A. The 74HC4852-Q100 74HCT4852-Q100 are dual 4-channel analog multiplexers/demultiplexers with common select inputs (S0 and S1). Both multiplexers have a common active LOW enable input (E), four independent inputs/outputs (nY0 to nY3) and two common inputs/outputs (1Z, 2Z). The devices feature injection-current effect control, which has excellent value in automotive applications where voltages in excess of the supply voltage are common. With E LOW, two of the eight switches are selected (low impedance ON-state) by S0 and S1. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 and S1. The injection-current effect control allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel. This eliminates the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Injection-current cross coupling < 1 mV/mA Wide supply voltage range from 2.0 V to 6.0 V for 74HC4852-Q100 ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 ) Latch-up performance exceeds 100 mA per JESD 78 Class II level A Low ON-state resistance: 400 (typical) at V =2.0 V CC 215 (typical) at V =3.0 V CC 120 (typical) at V =3.3 V CC 76 (typical) at V =4.5V CC 59 (typical) at V =6.0V CC74HC4852-Q100 74HCT4852-Q100 Nexperia Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control 3. Applications Analog multiplexing and demultiplexing Digital multiplexing and demultiplexing Signal gating Automotive application 4. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74HC4852D-Q100 40 C to +125 C SO16 plastic small outline package 16 leads SOT109-1 body width 3.9 mm 74HCT4852D-Q100 74HC4852PW-Q100 40 C to +125 C TSSOP16 plastic thin shrink small outline package 16 leads SOT403-1 body width 4.4 mm 74HCT4852PW-Q100 74HC4852BQ-Q100 40 C to +125 C DHVQFN16 plastic dual in-line compatible thermal enhanced SOT763-1 very thin quad flat package no leads 16 74HCT4852BQ-Q100 terminals body 2.5 3.5 0.85 mm 5. Functional diagram 10 0 0 4 9 3 1 13 6 G4 1Z 1Y0 12 MUX/DMUX 1Y1 14 1 0 10 S0 1Y2 15 5 1 3 9 S1 1Y3 11 2 2 4 2Y0 1 3 12 2Y1 5 0 14 2Y2 2 1 13 15 2 6 E 2Y3 4 2Z 11 3 3 001aag093 001aag094 Fig 1. Logic symbol Fig 2. IEC logic symbol 74HC HCT4852 Q100 All information provided in this document is subject to legal disclaimers. Nexperia B.V. 2017. All rights reserved Product data sheet Rev. 1 12 July 2012 2 of 21