MFEV710 Pegoda EV710 Rev. 3.1 15 January 2019 Product short data sheet 202631 COMPANY PUBLIC 1 General description The Pegoda MFRD710 reader is a reference design and evaluation reader for secure applications based on MIFARE and NTAG products. The MFEV710 evaluation kit is built around proven, well-established MIFARE products and a powerful Arm Cortex-M3 processors. The MFEV710 design in kit includes the MFRD710 contactless smartcard reader, a design based on the MFRC523 contactless reader IC. The kit supports the entire MIFARE and NTAG product portfolio: MIFARE Classic, MIFARE DESFire, MIFARE Plus, and MIFARE Ultralight C, NTAG, including SAM AV2 (in x- and non-x modes). The kit also offers full support of RFIDDiscover, with a reader library for all the MIFARE and NTAG products. It uses an open software concept and PC-based tools. The software code and hardware architecture are reusable, and each kit includes a sample SAM-based, secure reader architecture that implements multiple protocols. For added flexibility in development, the flash-based microcontroller supports custom application development based on Pegoda hardware. The microcontroller is open for customer code implementations, and the designs hardware interfaces are open for customer extensions. The kit includes native support for USB. An optional hardware extension board, available on request, provides additional support for RS232, RS485, and Ethernet. The extension board also has a JTAG interface, for debugging functionality directly on the microcontroller, and is accompanied by a free embedded toolchain for firmware customization. The GUI supplied with each kit uses the familiar Windows look and feel and offers a range of features, including history, log, timing profile management, key management and show cards. Minimum system requirements: The minimum system requirements for running either evaluation kit are as follows: Intel Pentium 166 MHz or equivalent, 32 Mbytes RAM, 20 Mbytes free hard disk space, USB support, and Windows 7 in 32- or 64-bit version.NXP Semiconductors MFEV710 Pegoda EV710 2 Features and benefits 2.1 Features Multiprotocol ISO/IEC 14443 and MIFARE Classic operation PC/SC-based architecture on widely deployed hardware solutions Full support for entire MIFARE and NTAG product portfolio and RFIDDiscover SAM support in standard or x-mode Arm Cortex-M3 microcontroller with integrated flash memory Firmware in source code and binaries USB host interface to PC and Windows-based user interface Optional support for RS232, RS485, JTAG, Ethernet 2.2 Benefits Fast, flexible development of SAM-based, secure reader systems Quick embedded development with portable code Easy customization with flash-based microcontroller Custom firmware and JTAG debugging with optional hardware extension board MFEV710 SDS All information provided in this document is subject to legal disclaimers. NXP B.V. 2019. All rights reserved. Product short data sheet Rev. 3.1 15 January 2019 COMPANY PUBLIC 202631 2 / 18