JN5169 IEEE802.15.4 Wireless Microcontroller Rev. 1.4 12 March 2020 Product data sheet 1. General description The JN5169 is an ultra low power, high performance wireless microcontroller suitable for ZigBee applications. It features 512 KB embedded Flash, 32 kB RAM and 4 kB EEPROM memory, allowing OTA upgrade capability without external memory. The 32-bit RISC processor offers high coding efficiency through variable width instructions, a multi-stage instruction pipeline and low-power operation with programmable clock speeds. It also includes a 2.4 GHz IEEE802.15.4 compliant transceiver and a comprehensive mix of analog and digital peripherals. The best in class RX operating current (down to 13 mA and with a 0.7 A sleep timer mode) gives excellent battery life allowing operation direct from a coin cell. Radio transmit power is configurable up to +10 dBm output. The peripherals support a wide range of applications. They include a 2-wire compatible 2 I C-bus and SPI-bus which can operate as either master or slave, a 6-channel ADC with a battery monitor and a temperature sensor. It can support a large switch matrix of up to 100 elements, or alternatively a 40-key capacitive touch pad. 2. Features and benefits 2.1 Benefits Single chip device to run stack and application Very low current solution for long battery life over 10 years Very low RX current for low standby power of mains powered nodes Integrated power amplifier for long range and robust communication High tolerance to interference from other 2.4 GHz radio sources Supports multiple network stacks Highly featured 32-bit RISC CPU for high performance and low power Large embedded Flash memory to enable over-the-air firmware updates without external Flash memory System BOM is low in component count and cost Flexible sensor interfacing options Very thin quad flat 6 6 mm, 40 terminal package lead-free and RoHS compliant Temperature range: 40 C to +125 C 2.2 Features: radio 2.4 GHz IEEE802.15.4 compliant RX current 14.7 mA, in low power receive mode 13 mA Receiver sensitivity 96 dBm Configurable transmit power, for example: JN5169NXP Semiconductors JN5169 IEEE802.15.4 Wireless Microcontroller 10 dBm, 23.3 mA 8.5 dBm, 19.6 mA 3 dBm, 14 mA Radio link budget 106 dB Maximum input level of +10 dBm Compensation for temperature drift of crystal oscillator frequency 128-bit AES security processor MAC accelerator with packet formatting, CRCs, address check, auto-acks, timers Integrated ultra low-power RC sleep oscillator (0.7 A) 2.0 V to 3.6 V battery operation Deep sleep current 50 nA (wake-up from IO) < 0.15 external component cost Antenna diversity (Auto RX) 2.3 Features: microcontroller 32-bit RISC CPU 1 MHz to 32 MHz clock speed Variable instruction width for high coding efficiency Multi-stage instruction pipeline 512 kB Flash 32 kB RAM 4 kB EEPROM Data EEPROM with guaranteed 100 k write operations ZigBee PRO stack with Home Automation, Light Link and Smart Energy profiles 2 2-wire I C-bus compatible serial interface can operate as either master or slave 5 PWM (4 timers, 1 timer/counter) 2 low-power sleep counters 2UARTs SPI-bus master and slave port, 3 selects Supply voltage monitor with 8 programmable thresholds 6-input 10-bit ADC, comparator Battery and temperature sensors Watchdog and Supply Voltage Monitor (SVM) Up to 20 Digital IO (DIO) pins 3. Applications Robust and secure low-power wireless applications ZigBee 3.0 Internet of Things (IoT) ZigBee Smart Energy networks ZigBee Light Link networks ZigBee Home Automation networks Toys and gaming peripherals Energy harvesting - for example, self-powered light switch JN5169 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2020. All rights reserved. Product data sheet Rev. 1.4 12 March 2020 2 of 96