Document Number: MC10XS3435 Freescale Semiconductor Rev. 11.0, 5/2014 Technical Data Quad High-side Switch 10XS3435 (Dual 10 mOhm, Dual 35 mOhm) The 10XS3435 is one in a family of devices designed for low voltage automotive lighting applications. Its four low R MOSFETs (dual DS(on) 10 mOhm/dual 35 mOhm) can control four separate 55/28 W bulbs, and/or Xenon modules, and/or LEDs. High-side Switch Programming, control and diagnostics are accomplished using a 16-bit SPI interface. Its output with selectable slew rate improves electromagnetic compatibility (EMC) behavior. Additionally, each output has its own parallel input or SPI control for pulse-width modulation (PWM) control. The 10XS3435 allows the user to program via the SPI the fault current trip levels and duration of acceptable lamp inrush. The device has Fail-safe mode to provide functionality of the outputs in case of MCU damage. This device is powered using SMARTMOS technology. Features Four protected 10 mOhm and 35 mOhm high side switches (at FK SUFFIX 25 C) 98ARL10596D Operating voltage range of 6.0 to 20 V with sleep current 24-PIN PQFN < 5.0 A, extended mode from 4.0 to 28 V 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting Applications with daisy chain capability Low-voltage automotive lighting PWM module using external clock or calibratable internal Xenon bulbs oscillator with programmable outputs delay management Halogen bulbs Smart overcurrent shutdown, severe short-circuit, overtemperature protections with time limited autoretry, and Fail- Light-emitting diodes (LEDs) safe mode in case of MCU damage High beam Output OFF or ON open-load detection compliant to bulbs or Low beam LEDs and short to battery detection Flashers Analog current feedback with selectable ratio and board Low-voltage industrial lighting temperature feedback V V V V V DD DD PWR DD PWR 10XS3435 VDD VPWR HS0 WAKE LOAD I/O FS SCLK SCLK CS CS HS1 SI SO LOAD I/O RST SO SI MCU HS2 I/O IN0 LOAD I/O IN1 I/O IN2 I/O IN3 HS3 A/D CSNS LOAD FSI GND GND Figure 1. 10XS3435 Simplified Application Diagram Freescale Semiconductor, Inc., 2008-2014. All rights reserved.ORDERABLE PARTS ORDERABLE PARTS Table 1. Orderable Part Variations Part Number(1) Temperature Package MC10XS3435BHFK - 40 to 125 C 24 PQFN MC10XS3435DHFK Notes 1. To order parts in Tape & Reel, add the R2 suffix to the part number. 10XS3435 Analog Integrated Circuit Device Data 2 Freescale Semiconductor