NXP Semiconductors Document Number: MC22XSD200 Rev. 2.0, 8/2016 Data Sheet: Advance Information Dual 24 V, 22 mOhm high-side switch 22XSD200 The 22XSD200 device is part of a 24 V dual high-side switch product family with integrated control, and a high number of protective and diagnostic functions. It is designed for industrial applications. The low R channels (<22 m) can DS(on) control different load types bulbs, solenoids, or DC motors. Control, device configuration, and diagnostics are performed through a 16-bit serial peripheral HIGH-SIDE SWITCH interface (SPI), allowing easy integration into existing applications. This device is powered by SMARTMOS technology. Both channels can be controlled individually by external/internal clock signals, or by direct inputs. Using the internal clock allows fully autonomous device operation. Programmable output voltage slew rates (individually programmable) helps improve electromagnetic compatibility (EMC) performance. To avoid shutting off the device upon inrush current, while still being able to closely track the load current, a dynamic overcurrent threshold profile is featured. Switching current of each channel can be sensed with a programmable sensing ratio. Whenever communication with the external microcontroller is lost, the device EK SUFFIX (PB-FREE) enters a Fail-safe operation mode, but remains operational, controllable, and 98ASA00368D protected. 32 PIN SOIC (10 mm X11 mm) Features Two fully-protected 22 m (at 25 C) high-side switches Applications Up to 3.0 A steady-state current per channel 24 V industrial systems Separate bulb and DC motor latched overcurrent handling Resistive, capacitive, and inductive loads Individually programmable internal/external PWM clock signals Industrial Overcurrent, short-circuit, and overtemperature protection with programmable autoretry functions Accurate temperature and current sensing Open load detection (channel in OFF and ON state), also for LED applications (7.0 mA typ.) Normal operating range: 8.0 V to 36 V, extended range: 6.0 V to 58 V 3.3 V and 5.0 V compatible 16-bit SPI port for device control, configuration and diagnostics at rates up to 8.0 MHz V V V DD DD PWR 22XSD200 VDD VPWR I/O CLOCK I/O FSB SCLK SCLK HS0 CSB CSB LOAD SI SO MCU I/O RSTB SO SI HS1 I/O IN0 LOAD M I/O IN1 CONF0 CONF1 I/O FSOB A/D SYNC A/D CSNS GND GND Figure 1. Simplified application diagram * This document contains certain information on a new product. Specifications and information herein are subject to change without notice. 2016 NXP B.V.ORDERABLE PARTS Orderable parts Table 1. Orderable part variations (1) Part number Temperature (T ) Package A MC22XSD200BEK -40 C to 125 C 32 SOIC-EP Notes 1. To order parts in Tape & Reel, add the R2 suffix to the part number. 22XSD200 2 NXP Semiconductors