MC56F8357MPYE NXP

56F8357/56F8157 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controllers MC56F8357 Rev. 15 01/2007 freescale.com Document Revision History Version History Description of Change Rev 1.0 Initial Public Release Rev 2.0 Added Package Pins to GPIO Table in Part 8 General Purpose Input/Output (GPIO). Added Typical Min values to Table 10-17. Editing grammar, spelling, consistency of language throughout family. Updated values in Regulator Parameters Table 10-9 External Clock Operation Timing Requirements Table 10-13 SPI Timing Table 10-18 ADC Parameters Table 10-24 and IO Loading Coefficients at 10MHz Table 10-25. Rev 3.0 Corrected Table 4-6 Data Memory Map - changed address X: FF0000 to X: FFFF00 Rev 4.0 Added Part 4.8, added the word access to FM Error Interrupt in Table 4-5, documenting only Typ. numbers for LVI in Table 10-6, updated EMI numbers and write-up in Part 10.8. Rev 5.0 Updated numbers in Table 10-7 and Table 10-8 with more recent data. Corrected typo in Table 10-3 in Pd characteristics. Rev 6.0 Replace any reference to Flash Interface Unit with Flash Module removed references to JTAG pin DE corrected pin number for D14 in Table 2-2 added note to V pin in Table 2-2 corrected CAP thermal numbers for 160 LQFP in Table 10-3 removed unneccessary notes in Table 10-12 corrected temperature range in Table 10-14 added ADC calibration information to Table 10-24 and new graphs in Figure 10-22. Rev 7.0 Adding/clarifing notes to Table 4-4 to help clarify independent program flash blocks and other Program Flash modes, clarification in Table 10-23, corrected Digital Input Current Low (pull-up enabled) numbers in Table 10-5. Removed text and Table 10-2 replaced with note to Table 10-1. Rev 8.0 Added 56F8157 information edited to indicate differences in 56F8357 and 56F8157. Reformatted for Freescale look and feel. Updated Temperature Sensor and ADC tables, then updated balance of elec- trical tables for consistency throughout the family. Clarified I/O power description in Table 2-2, added note to Table 10-7 and clarified Section 12.3. Rev 9.0 Added output voltage maximum value and note to clarify in Table 10-1 also removed overall life expectancy note, since life expectancy is dependent on customer usage and must be determined by reliability engineering. Clarified value and unit measure for Maximum allowed P in Table 10-3. Cor- D rected note about average value for Flash Data Retention in Table 10-4. Added new RoHS-compliant orderable part numbers in Table 13-1. Rev 10.0 Added 160MAPBGA information,TA equation updated in Table 10-4 and additional minor edits throughout data sheet Rev 11.0 Updated Table 10-24 to reflect new value for maximum Uncalibrated Gain Error Rev. 12.0 Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4. Added RoHS-compliance and pb-free language to back cover. Rev. 13.0 Corrected Section 6.4 title (from Operation Mode Register to Operating Mode Register). Added information/corrected state during reset in Table 2-2. Clarified external reference crystal frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz. Rev. 14.0 Replaced Tri-stated with an explanation in State During Reset column in Table 2-2. 56F8357 Technical Data, Rev. 15 2 Freescale Semiconductor Preliminary