i.MX applications processors Evaluation Kit Based on i.MX 6ULL Applications Processors NXP delivers the next installment in a line of highly flexible, market-focused development tools with an evaluation kit (EVK) based on the i.MX 6ULL applications processor. The i.MX 6ULL processor is an extension of the popular i.MX 6ULL EVK System Contents i.MX 6 series, with a single ARM Cortex -A7 core running i.MX 6ULL CPU board and base board up to 528 MHz. This EVK enables an LCD display and audio playback as well as many connectivity options. It is SENSORS designed to showcase the most commonly used features of The NXP FXLS8471Q accelerometer is highly versatile for the processor in a small, low-cost package and to facilitate industrial and consumer high-performance low-g applications software development with the ultimate goal of faster that offer noise density, board mount offset, temperature time-to-market through the support of the Linux performance and sensitivity. Integrated motion detection operating system. features include tilt, shake and tap detection with a new vector magnitude output that simplifies implementation and EFFICIENT PERFORMANCE WITH LOW POWER reduces power consumption. The NXP MAG3110 eCOMPASS AT A LOW BOM COST is a small, low-power digital 3D magnetic sensor with a Leveraging the energy efficiency of the Cortex-A7 core, wide dynamic range to allow operation in PCBs with high the i.MX 6ULL is the smallest and most energy-efficient extraneous magnetic fields. A footprint is also available processor built on ARM technology, providing maximum to enable a gyroscope sensor. performance in low-power, space-constrained embedded environments. The board is powered by discrete power circuitry consisting of three DC-to-DC converters and one low dropout (LDO) regulator.i.MX 6ULL EVK MCIMX6ULL-EVK FEATURES CPU Board NXP i.MX 6ULL 528 MHz ARM Cortex -A7 core, Processor MCIMX6Y2DVM05AA Power Discretes management 4 GB DDR3L SDRAM, 400 MHz 256 MB Quad SPI flash Memory MicroSD connector Footprint for eMMC Footprint for NAND flash Size 2.66 inch x 1.27 inch (6.76 cm x 4.24 cm), 4-layer board Base Board LCD expansion port connector Display board interface HDMI connector and footprint for HDMI transmitter Audio codec 3.5 mm stereo headphone output with MIC Audio Mono-microphone input on board Left and right speaker out connectors SOFTWARE AND TOOLS One USB 2.0 Micro-B OTG connector Simplify product design with a low-cost, feature-rich One USB 2.0 Standard-A host connector development platform that allows you to work with the majority Connectivity Two Ethernet (10/100T) connectors of the processors primary features and the corresponding Dual CAN connector software support. For software, design files, development tools SD/SDIO connector and additional information, visit www.nxp.com/iMX6tools. Camera Parallel camera connector NXP MAG3110 eCOMPASS Sensors NXP FXLS8471Q accelerometer Footprint for gyroscope 20-pin standard JTAG connector Debug UART to Micro USB connector Expansion port Arduino header Size 5.12 inch x 4.25 inch (13.0 cm x 10.8 cm), 4-layer board www.nxp.com/iMX6ULLEVK and imxcommunity.org NXP, the NXP logo, Freescale and the Energy Efficient Solutions logo are trademarks of NXP Semiconductors. All other product or service names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. 2016 NXP B.V. Document Number: EVKIMX6ULFS REV 2