Integrated Communications Processors MPC837x PowerQUICC II Pro Overview Todays small-to-medium business (SMB) and consumer applications are driving the need for highly integrated and cost effective solutions that deliver high performance. The next generation PowerQUICC II Pro MPC837x family provides an e300 core, built on Power Architecture technology, integrated with PCI Express and Serial-ATA (SATA) controllers, as well as dual Gigabit Ethernet controllers, to specifically address the needs of SMB and consumer applications. The new MPC837x family, based in 90 nm process technology, provides high integration that simplifies board design and offers a cost-effective solution that is critical for applications such as wireless access points, printers, network attached storage and SMB routers. e300 Platform Built on Power Architecture Technology The next generation MPC837x family utilizes the 32-bit superscalar e300 core. It integrates two integer units and a floating-point unit, making it ideal for computational applications. It supports 32 KB L1 data and instruction cache, and has an operating frequency from 400 MHz to 800 MHz. The MPC837x family is software compatible with existing 603e core-based products. and supports either x1 or x2 widths, Key Advantages Integrated Fabric Controllers making it an excellent choice for wireless High performance e300 core operating up (PCI Express & Serial-ATA) access points and low-end printers. The to 800 MHz with 32 KB L1 cache A key differentiator for the MPC837x family is integrated SATA controllers support both Integrated PCI Express and SATA the integration of PCI Express and Serial-ATA SATA I and II data rates (1.5 and 3.0 Gbaud), controllers providing a cost-effective (SATA), which reduces the number of external providing integrated support for hard disk System-on-Chip (SoC) solution controller chips and provides customers with drive applications such as network a cost-effective solution. The PCI Express Key networking capabilities enabled by controller is revision 1.0a compatible attached storage. dual Gigabit Ethernet ports Integrated security engineANG = 800/400 MPC837xE PowerQUICC II Pro Family MPC8379E MPC8378E MPC8377E Core e300 e300 e300 CPU Speed 400, 533, 667, 800 MHz 400, 533, 667, 800 MHz 400, 533, 667, 800 MHz L1 I/D Cache 32 KB 32 KB 32 KB Memory Controller 32/64-bit DDR/2 up to 400 MHz 32/64-bit DDR/2 up to 400 MHz 32/64-bit DDR/2 up to 400 MHz Local Bus 32-bit with NAND boot support 32-bit with NAND boot support 32-bit with NAND boot support PCI 32-bit up to 66 MHz (2.3) 32-bit up to 66 MHz (2.3) 32-bit up to 66 MHz (2.3) PCI Express 2x1 or 1x2 2x1 or 1x2 SATA 4 x 1 SATA 2.0 with PHY 2 x 1 SATA 2.0 with PHY Two 10/100/1000 Two 10/100/1000 Two 10/100/1000 Ethernet (RGMII, RTBI, RMII, MII) (SGMII, RGMII, RTBI, RMII, MII) (RGMII, RTBI, RMII, MII) USB One 2.0 Host or Device One 2.0 Host or Device One 2.0 Host or Device Security E version only E version only E version only 2 2 2 Additional Interfaces 2 x UART, 2 x I C, SPI 2 x UART, 2 x I C, SPI 2 x UART, 2 x I C, SPI Interrupt Controller Yes Yes Yes Package 689 Te PBGA 689 Te PBGA 689 Te PBGA Technical Specifications 32-bit PCI interface operating up to Message Digest Execution unit supports 66 MHz, Rev 2.3 compatible HSA1/2 and SHA-384/512 e300 core built on Power Architecture technology PCI Express with two interfaces support ARC Four Execution Unit, Kasumi Operating from 400 to 800 MHz Execution Unit and CRC Execution Unit x1 and x2 widths Integrated floating point and dual XOR acceleration Integrated SATA controllers with support integer units for SATA I and II (1.5 Gbps and 3 Gbps), Additional Support 32 KB L1 data and instruction cache An enhanced local bus controller Integrated Security (optional, indicated with with parity checking with support for boot from NAND an E in the device number) Memory Controller and NOR flash Public Key Encryption unit supports RSA 32- or 64-bit DDR1/2 memory controller, 4-channel DMA controller and Diffie Hellman up to 400 MHz data rate 2 Dual I C controller, DUART, SPI interface Data Encryption Standard Execution I/O Support Unit supports DES/3DES, ECB, CBC Dual 10/100/1000 Ethernet Controllers and OFB modes with support for MII, RMII, RGMII, RTBI Advanced Encryption Standard Unit and SGMII supports key lengths up to 256b, and Support for IEEE 1588 USB 2.0 host and device controller supports ECB, CBC, CTR, CCM, GCM, CMAC, OFB, CFB and LRW For current information about Freescale Learn More: products and documentation, please visit www.freescale.com. Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. Freescale Semiconductor, Inc. 2009. Document Number: MPC837XFFS REV 1