P1010RDB-PB NXP

Freescale Semiconductor Document Number: P1010RDBPBQS P1010RDB-PB Quick Start Guide Rev. 0, 10/2013 P1010RDB-PB Quick Start Guide Contents 1 Introduction to P1010RDB-PB 1. Introduction to P1010RDB-PB 1 2. Getting Started 2 This quick start guide applies to boards with assembly revision 700-27904 Rev X4. See the top side of the board to get the revision number. This document describes P1010RDB-PB and its related hardware kit. It also explains and verifies the basic board operations in a step-by-step format. This document shows settings for switches, connectors, jumpers, push buttons, and LEDs, and you can find instructions for connecting peripheral devices. 2013 Freescale Semiconductor, Inc. All rights reserved. Getting Started Figure 1. P1010RDB-PB Board 1.1 Noteworthy Items The default uboot image, dtb, Linux kernel and file systems are loaded in NAND flash. 32 MB NOR Flash is split into two banks by SW1 8 switch. 2 Getting Started This section explains: Section 2.1, Preloaded Binaries on the Board Section 2.2, Default Booting Method and Switch Settings Section 2.3, Booting the Board 2.1 Preloaded Binaries on the Board The P1010RDB-PB kit contains: On-board NAND Flash loaded w ith early release image files: P1010RDB-PB Quick Start Guide, Rev. 0 2 Freescale Semiconductor