PCA9564D,118 NXP

INTEGRATED CIRCUITS PCA9564 2 Parallel bus to I C-bus controller Product data sheet 2006 Sep 01 Supersedes data of 2004 Jun 25 Philips SemiconductorsPhilips Semiconductors Product data sheet 2 Parallel bus to I C-bus controller PCA9564 DESCRIPTION The PCA9564 is an integrated circuit designed in CMOS technology that serves as an interface between most standard parallel-bus 2 microcontrollers/microprocessors and the serial I C-bus and allows the parallel bus system to communicate bi-directionally with the 2 I C-bus. The PCA9564 can operate as a master or a slave and can 2 be a transmitter or receiver. Communication with the I C-bus is carried out on a byte-wise basis using interrupt or polled handshake. 2 The PCA9564 controls all the I C-bus specific sequences, protocol, arbitration and timing with no external timing element required. FEATURES The PCA9564 is similar to the PCF8584 but operates at lower 2 Parallel-bus to I C-bus protocol converter and interface voltages and higher I C frequencies. Other enhancements requested by design engineers have also been incorporated. Both master and slave functions Multi-master capability Characteristic PCA9564 PCF8584 Comments Voltage range 2.33.6 V 4.55.5 V PCA9564 is 5 V Internal oscillator reduces external components tolerant Operating supply voltage 2.3 V to 3.6 V 2 Maximum 360 kHz 90 kHz Faster I C interface master mode 5 V tolerant I/Os 2 I C frequency 2 Standard and fast mode I C capable and compatible with SMBus 2 Maximum slave 400 kHz 100 kHz Faster I C interface 2 mode I C ESD protection exceeds 2000 V HEM per JESD22-A114, frequency 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101 Clock source Internal External Less expensive and more flexible with Latch-up testing is done to JEDEC Standard JESD78 which internal oscillator exceed 100 mA. Parallel Fast Slow Compatible with Packages offered: DIP20, SO20, TSSOP20, HVQFN20 interface 50 MHz faster processors APPLICATIONS While the PCF8584 supported most parallel-bus microcontrollers/ 2 Add I C-bus port to controllers/processors that do not have one microprocessors including the Intel 8049/8051, Motorola 6800/68000 and the Zilog Z80, the PCA9564 has been designed to 2 Add additional I C-bus ports to controllers/processors that need 2 be very similar to the Philips standard 80C51 microcontroller I C 2 multiple I C-bus ports hardware so the devices are not code compatible. Additionally, the PCA9564 does not support the bus monitor Snoop mode nor the Higher frequency, lower voltage migration path for the PCF8584 long distance mode and is not footprint compatible with the Converts 8 bits of parallel data to serial data stream to prevent PCF8584. having to run a large number of traces across the entire PC board ORDERING INFORMATION PACKAGES TEMPERATURE RANGE ORDER CODE TOPSIDE MARK DRAWING NUMBER 20-Pin Plastic DIP 40 C to +85 C PCA9564N PCA9564N SOT146-1 20-Pin Plastic SO 40 C to +85 C PCA9564D PCA9564D SOT163-1 20-Pin Plastic TSSOP 40 C to +85 C PCA9564PW PCA9564 SOT360-1 20-Pin Plastic HVQFN 40 C to +85 C PCA9564BS 9564 SOT662-1 whole wafer 40 C to +85 C PCA9564U n/a n/a Standard packing quantities and other packaging data are available at www.standardics.philips.com/packaging. 2006 Sep 01 2