PCA9847 2 8-channel ultra-low voltage, Fm+ I C-bus multiplexer with reset Rev. 1 9 November 2015 Product data sheet 1. General description The PCA9847 is an ultra-low voltage, octal bidirectional translating multiplexer controlled 2 via the I C-bus. The SCL/SDA upstream pair fans out to eight downstream pairs, or channels. Any single SCx/SDx channel can be selected, determined by the 2 programmable control register. This feature allows multiple devices with the same I C-bus address to reside on the same bus. The multiplexer device can also separate a heavily 2 loaded I C-bus into separate bus segments, eliminating the need for a bus buffer. An active LOW reset input allows the PCA9847 to recover from a situation where one of 2 the downstream I C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets 2 the I C-bus state machine and deselects all the channels, as does the internal Power-On Reset (POR) function. The pass gates of the multiplexers are constructed such that the V pin is used to limit DD1 the maximum high voltage which is passed by the PCA9847. This allows the use of different bus voltages on each channel, so that 0.8 V, 1.8 V, 2.5 V or 3.3 V parts can communicate without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 3.6 V tolerant. 2. Features and benefits Ultra-low voltage operation, down to 0.8 V to interface with next-generation CPUs 1-of-8 bidirectional translating multiplexer 2 Fm+ I C-bus interface logic compatible with SMBus standards Active LOW reset input 2 2 address pins allowing up to 16 devices on the I C-bus 2 Channel selection via I C-bus Power-up with all multiplexer channels deselected Low R switches on Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V and 3.3 V buses 2 Reset via I C-bus software command 2 I C Device ID function No glitch on power-up Supports hot insertion since all channels are de-selected at power-on Low standby current 3.6 V tolerant inputs 0 Hz to 1 MHz clock frequency ESD protection exceeds 6000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101PCA9847 NXP Semiconductors 2 8-channel ultra-low voltage, Fm+ I C-bus multiplexer with reset Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA Two packages offered: TSSOP24 and HVQFN24 3. Ordering information Table 1. Ordering information Type number Topside Package marking Name Description Version 1 PCA9847BS PCA9847 HVQFN24 plastic thermal enhanced very thin quad flat package SOT616-1 no leads 24 terminals body 4 4 0.85 mm PCA9847PW PCA9847PW TSSOP24 plastic thin shrink small outline package 24 leads SOT355-1 body width 4.4 mm 1 Package is in development. Contact NXP for availability. 3.1 Ordering options Table 2. Ordering options Type number Orderable Package Packing method Minimum Temperature range part number order quantity 1 PCA9847BS PCA9847BSJ HVQFN24 Reel 13 Q1/T1 6000 T = 40 Cto +85 C amb *Standard mark SMD PCA9847PW PCA9847PWJ TSSOP24 Reel 13 Q1/T1 2500 T = 40 Cto +85 C amb *Standard mark SMD PCA9847PW PCA9847PWZ TSSOP24 Reel 13 Q1/T1 500 T = 40 Cto +85 C amb *Standard mark SMD 1 Package is in development. Contact NXP for availability. PCA9847 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2015. All rights reserved. Product data sheet Rev. 1 9 November 2015 2 of 31