Combining USB and Ethernet into one debug probe S32 Design Studio S32 Debug Probe FEATURES OVERVIEW Allows either USB or Ethernet (10/100) host connection for The S32 Debug Probe enables NXP target system debugging the developer workstation via standard debug port while connected to a developers workstation via Ethernet or USB. The S32 Debug Probe is USB powered, even when using Ethernet also known by such industry-standard terms as probe, JTAG Supports debugging via JTAG interface probe, JTAG emulator or target probe. Automatically supports system voltage levels from 1.2 to 3.3 Using S32 Debug Probes Ethernet connection, developers Supports all available core speeds and voltages for sup- can debug systems remotely or more effectively share a ported NXP automotive microcontrollers and processors single system with multiple developers. When a shared system is not needed, the S32 Debug Probe connects directly In conjunction with the S32 Design Studio, S32 Debug to the developers workstation with a single USB cable. The Probe: USB port supplies power so that no additional cables are Programs system flash memory during debug and needed. development phases of the project The S32 Debug Probe is designed to work in conjunction Controls the target development system even when the with S32 Design Studio and NXP automotive microcontrollers system may have crashed during develop-ment and processors. It is a critical debug tool in all phases of Offers complete system visibility and control, including project development. reading/writing of CPU registers, memory-mapped registers, block reading/writing of memories, single-step debugging, setting software and hardware breakpoints, and monitoring target system status Gives control over the target system execution, including control of one or all cores and resetsCONTACT NXP FOR INFORMATION REGARDING: KIT CONTENTS Integrating S32 Debug Probe into your software S32 Debug Probe Utilizing this probe as your target debug probe USB power supply USB cable SYSTEM REQUIREMENTS Arm 10-pin probe tip and ribbon cable 10/100 Ethernet or USB on host computer Arm 20-pin probe tip and ribbon cable Debug target headers that match the probe tips provided * Ethernet cable not included SUPPORTED DEVICES ORDER INFORMATION NXP S32V234 vision processor S32 Debug Probe can be ordered at nxp.com or from an NXP S32S safety processor authorized NXP distributor. Part number: S32DBGPROBE S32 DEBUG PROBE www.nxp.com/S32DebugProbe NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm is a trademark or registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. 2019 NXP B.V. Document Number: S32DEBUGPROBE FS REV 3