SSL21081AT1,118 NXP

SSL21081AT Compact non-dimmable LED driver IC Rev. 6 3 October 2013 Product data sheet 1. General description The SSL21081AT is a high-voltage Integrated Circuit (IC) for driving LED lamps in general mains non-dimmable lighting applications. The main benefits are: Small Printed-Circuit Board (PCB) footprint compact solution High efficiency (up to 95 %) Ease of integration Low electronic Bill Of Material (BOM) The IC incorporates a 300 V MOSFET. The IC works as boundary conduction mode converters, typically in buck configuration. It has been designed to start up directly from the HV supply by an internal high-voltage current source. Thereafter, the dV/dt supply is used with capacitive coupling from the drain or any other auxiliary supply. This function provides full flexibility in the application design. The IC consumes 1.3 mA of supply current with an internal clamp limiting the supply voltage. The IC provides accurate output current control with LED current accuracy within 5 %. It can be operated using Pulse-Width Modulation (PWM) current regulation. It includes many protection features including easy LED temperature feedback. 2. Features and benefits LED driver ICs for driving LED strings from a rectified mains supply High-efficiency switch mode buck driver product family: drivers with integrated 300 V (DC) power switches Controller with power-efficient boundary conduction mode of operation with: No reverse recovery losses in freewheel diode Zero Current Switching (ZCS) for turn-on of switch Zero voltage or valley switching for turn-on of switch Minimal required inductance value and size Direct PWM current regulation possible Fast transient response through cycle-by-cycle current control: Negligible AC mains ripple at LED current and minimal total capacitor value No over or undershoots in the LED currentSSL21081AT NXP Semiconductors Compact non-dimmable LED driver IC Internal protections: UnderVoltage LockOut (UVLO) Leading-Edge Blanking (LEB) OverCurrent Protection (OCP) Internal OverTemperature Protection (OTP) Brownout protection Output Short Protection (OSP) Low component count LED driver solution (see Figure 3): No Schottky diode required due to ZCS Easy external temperature protection with a single NTC resistor Option for soft-start function 1 Compatible with wall switches with built-in indication light during standby IC lifetime easily matches or surpasses LED lamp lifetime 3. Applications The SSL21081AT is intended for compact mains non-dimmable LED lighting applications with accurate fixed current output for single mains input voltages. Mains input voltages include 100 V (AC), 120 V (AC). The output signal can be modulated using a PWM signal. 1. The Hotaru switch is a well-known wall switch with built-in light SSL21081AT All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 6 3 October 2013 2 of 21