TDA8579T/N1SU NXP

TDA8579T Dual common-mode rejection differential line receiver Rev. 4 23 September 2013 Product data sheet 1. General description The TDA8579T is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated. The device is intended to be used to receive line inputs in audio applications that require a high level of common-mode rejection. The device is contained in an 8-pin Small Outline (SO) package. 2. Features and benefits Excellent common-mode rejection, up to high frequencies Elimination of source resistance dependency in the common-mode rejection Few external components High supply voltage ripple rejection Low noise Low distortion All pins protected against electrostatic discharge AC and DC short-circuit safe to ground and V CC Fast DC settling 3. Quick reference data Table 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit V supply voltage 5.0 8.5 18 V CC I supply current V =8.5 V - 11 14 mA CC CC G voltage gain 0.5 0 +0.5 dB V SVRR supply voltage ripple rejection 55 60 - dB V noise output voltage - 3.7 5.0 V no Z input impedance 100 240 - k i CMRR common-mode rejection ratio R =0 -80 - dB sTDA8579T NXP Semiconductors Dual common-mode rejection differential line receiver 4. Ordering information Table 2. Ordering information Type number Package Name Description Version TDA8579T SO8 plastic small outline package 8 leads body width 3.9 mm SOT96-1 5. Block diagram V CC 8 1 7 INL+ OUTL V CC 2 4 IN- TDA8579T SVRR 6 3 OUTR INR+ 5 GND aaa-008045 Fig 1. Block diagram 6. Pinning information 6.1 Pinning 1 8 INL+ VCC 2 7 IN- OUTL TDA8579T 3 6 INR+ OUTR 4 5 SVRR GND aaa-008040 Fig 2. Pin configuration TDA8579T All information provided in this document is subject to legal disclaimers. NXP B.V. 2013. All rights reserved. Product data sheet Rev. 4 23 September 2013 2 of 16