TJA1100HNZ NXP

TJA1100 100BASE-T1 PHY for Automotive Ethernet Rev. 3 23 May 2017 Product data sheet 1. General description The TJA1100 is a 100BASE-T1 compliant Ethernet PHY optimized for automotive use cases. The device provides 100 Mbit/s transmit and receive capability over a single Unshielded Twisted Pair (UTP) cable, supporting a cable length of up to at least 15 m. Optimized for automotive use cases such as IP camera links, driver assistance systems and back-bone networks, the TJA1100 has been designed to minimize power consumption and system costs, while still providing the robustness required for automotive use cases. 2. Features and benefits 2.1 Optimized for automotive use cases Transmitter optimized for capacitive coupling to unshielded twisted-pair cable Enhanced integrated PAM-3 pulse shaping for low RF emissions Adaptive receive equalizer optimized for automotive cable length of up to at least 15 m Reduced power consumption through configurable transmitter pulse amplitude adapted to cable length Dedicated PHY enable/disable input pin to minimize power consumption Low-power Sleep mode with local wake-up support Robust remote wake-up via the bus lines Gap-free supply undervoltage detection with fail-silent behavior EMC-optimized output driver strength for Media Independent Interface (MII) and Reduced MII (RMII) Diagnosis of cabling errors (shorts and opens) Small HVQFN-36 package for PCB space-constrained applications MDI pins protected against ESD to 6kV HBM and 6kV IEC61000-4-2 MDI pins protected against transients in automotive environment Automotive-grade temperature range from 40 C to +125 C Automotive product qualification in accordance with AEC-Q100 2.2 Miscellaneous MII as well as RMII standard compliant interface Reverse MII mode for back-to-back connection of two PHYs 3V3 single supply operation with on-chip 1.8 V LDO regulators On-chip termination resistors for balanced UTP cable Jumbo frame support up to 16 kB Internal, external and remote loopback mode for diagnosisTJA1100 NXP Semiconductors 100BASE-T1 PHY for Automotive Ethernet Bus pins short-circuit proof to battery voltage and ground (including common mode choke, 100 nF coupling capacitors) LED control output for link diagnosis 3. Ordering information Table 1. Ordering information Type number Package Name Description Version TJA1100HN HVQFN36 plastic thermal enhanced very thin quad flat package no leads 36 terminals SOT1092-2 body 6 6 0.85 mm TJA1100 All information provided in this document is subject to legal disclaimers. NXP Semiconductors N.V. 2017. All rights reserved. Product data sheet Rev. 3 23 May 2017 2 of 55