12FR005 Ohmite

10 Series Axial Wire Element Current Sense Two Terminal Axial F e at u r e S SerieS SpeCiFiCationS Ideal for current sensing applications Series Wattage Ohms 1% Tolerance standard, others available 12 2 0.005-0.10 13 3 0.005-0.20 Fixed resistance measuring point M 15 5 0.005-0.25 Low inductance (non-inductive below 0.25) RoHS compliant product available add E suffix to part number to specify CharaCteriStiCS Terminals Solder-plated copper terminals or copper clad steel depending 700 on ohmic value. RoHS solder is 96% Sn, 3.5% Ag, 0.5% Cu Temperature Encapsulation Silicone molding compound 600 Coefficient of Resistance Derating Linearly from 100% +25C to 0% +275C 500 2 watt Tolerance 1% standard Others available 400 3 watt 5 watt Based on 25C free air rating Power rating 300 Overload 5 times rated wattage for 5 seconds 200 Dielectric withstanding voltage 1000 VRMS for 3 and 5 watt 500 VRMS for 2 watt 100 Insulation resistance Not less than 1000M 0 Thermal EMF Less than 2V/C 0 10 20 30 40 50 -55C to 275C Temperature range Milliohms DimenSionS orDerinG inFormation Wattage RoHS Compliant 1.562 0.062 / L max. D .010 / d .002 / 39.7mm 1.6 0.3mm 0.05mm 13FR050E T 10 Series Tolerance Ohm Value Tape & reel M F= 1% Example: 12FR: 1250 pcs D=0.5% R050 = 0.05 13FR: 1000 pcs 15FR: 750 pcs Series Wattage Length L Diam. D M d (lead ga.) 12 2 0.416 / 10.6 0.094 / 2.4 1.156 / 29.4 20 Standard part numbers 13 3 0.570 / 14.5 0.205 / 5.2 1.310 / 33.3 20 Ohmic value 2 watt 3 watt 5 watt 15 5 0.935 / 23.8 0.330 / 8.4 1.675 / 42.5 18 0.005 12FR005E 13FR005E 15FR005E 0.010 12FR010E 13FR010E 15FR010E 0.015 12FR015E 13FR015E 15FR015E 0.020 12FR020E 13FR020E 15FR020E 0.025 12FR025E 13FR025E 15FR025E 0.030 12FR030E 13FR030E 15FR030E 0.040 12FR040E 13FR040E 15FR040E 0.050 12FR050E 13FR050E 15FR050E 0.060 12FR060E 13FR060E 15FR060E 0.070 12FR070E 13FR070E 15FR070E 0.080 12FR080E 13FR080E 15FR080E 0.090 12FR090E 13FR090E 15FR090E 0.100 12FR100E 13FR100E 15FR100E 0.150 13FR150E 15FR150E 0.200 13FR200E 15FR200E 0.250 15FR250E (continued) 44 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com ppm/ C10 Series Axial Wire Element Current Sense Four Terminal Axial FeatureS Ohmites Four-terminal Current-sense Resistors are specifically designed for low-resistance applications Ideal for current sensing applications requiring the highest accuracy and temperature 1% Tolerance standard, others available stability. This four-terminal version of Ohmites 10 Low Inductance (non-inductive below 0.25) Series resistor is specially designed for use in a Kelvin configuration, in which a current is applied Tinned Copper Leads through two opposite terminals and sensing voltage RoHS Compliant is measured across the other two terminals . The Kelvin configuration enables the resistance SerieS SpeCiFiCationS and temperature coefficient of the terminals to be Series Wattage Ohms effectively eliminated. The four terminal design 13 3 0.005-0.1 also results in a lower temperature coefficient of 14 4.5 0.005-0.1 resistance and lower self-heating drift which may be 17 7 0.005-0.1 experienced on two-terminal resistors. The require- ment to connect to the terminals at precise test points is eliminated, allowing for tighter tolerancing on the end application. CharaCteriStiCS DimenSionS Terminals Tinned Copper Leads D +.015 / B .010 / L +.015 / A (min.) +0.4 Encapsulation Silicone Molding Compound 0.03 +0.4 Derating Linearly from 100% at +25C to 0% at +200C 0.032 .002 0.005 to 0.100 standard Resistance Range 0.81.05 Standard Tolerance 1% others available (20 AWG) Operating Temp. Range -55C to +200C Series Wattage Length Diam. A B 13 3 0.625/15.9 0.200/5.08 1.25/31.8 0.125/3.18 Temperature Coefficient (0C to 85C) 0.015: 50 PPM/C 14 4.5 1.060/26.9 0.335/8.51 1.50/38.1 0.200/5.08 of Resistance <0.015: 100 PPM/C 17 7 1.500/38.1 0.375/9.53 1.50/38.1 0.200/5.08 Environmental Exceeds the requirements of MIL- Performance PRF-49465 orDerinG inFormation Based on 25C free air rating. Power rating Terminals Overload 5 times rated wattage for 5 seconds Blank =2 terminals Wattage RoHS Compliant P = 4 terminals Max. Current 22 amps Dialectric withstanding 1500 VAC for 4.5 and 7 watt 1000 voltage VAC for 3 watt 10 Series Tolerance Ohm Value F= 1% Example: Insulation resistance Not less than 1000 M D= 0.5% R050= 0.05 Less than 2V/C Thermal EMF Standard part numbers Ohmic value 3 watt 4.5 watt 7 watt 0.005 13FPR005E 14FPR005E 17FPR005E 0.010 13FPR010E 14FPR010E 17FPR010E 0.015 13FPR015E 14FPR015E 17FPR015E 0.020 13FPR020E 14FPR020E 17FPR020E 0.025 13FPR025E 14FPR025E 17FPR025E 0.030 13FPR030E 14FPR030E 17FPR030E 0.040 13FPR040E 14FPR040E 17FPR040E 0.050 13FPR050E 14FPR050E 17FPR050E 0.060 13FPR060E 14FPR060E 17FPR060E 0.070 13FPR070E 14FPR070E 17FPR070E 0.075 13FPR075E 14FPR075E 17FPR075E 0.080 13FPR080E 14FPR080E 17FPR080E 0.090 13FPR090E 14FPR090E 17FPR090E 0.100 13FPR100E 14FPR100E 17FPR100E rev 8/18-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 45