40 Series Ohmicone Silicone-Ceramic Conformal Axial Terminal Wirewound 1% and 5% Tolerance Standard Ohmite 40 Series resistors are the most economical conformal silicone-ceramic coated resistors offered. These all-welded units are characterized by their low temperature coefficients and resistance to thermal shock, making them ideal for a wide range of electri- F e at u r e S cal and electronic applications. Units with 1% and 5% tolerances are identical in Economical construction and electrical specifications. Durable Applications include commercial, industrial and but economical 40 Series resistors exceed industr y communications equipment requirements for quality. Stability under high temperature conditions All-welded construction RoHS compliant add E suffix to part number to specify. SerieS SPeCiFiCatiONS Series Wattage Ohms Voltage 41 1.0 0.10-6K 150 42 2.0 0.10-8K 100 43 3.0 0.10-20K 200 45 5.0 0.10-70K 460 47 7.0 0.10-80K 670 40 10.0 0.10-150K 1000 Non-Inductive versions available. Insert N before tolerance code. Example: 42NJ27R CharaCteriStiCS Coating Conformal silicone-ceramic. Core Ceramic. Terminals Solder-coated copper clad axial. RoHS solder composition is 96% Sn, 3.5% Ag, 0.5% Cu Derating Linearly from 100% +25C to 0% +275C. Tolerance 5% (J type), 1% (F type) (other tolerances available). Power rating Based on 25C free air rating Overload Under 5 watts: 5 times rated wattage for 5 seconds. 5 watts and over: 10 times rated wattage for 5 seconds. Temperature coefficient Under 1: 90 ppm/C 1 to 9.99: 50 ppm/C 10 and over: 20 ppm/C Operating temp. range -55C to 275C DimeNSiONS Series Wattage Length Diam. Lead ga. (in./mm max.) 41 1.0 0.437 / 11.1 0.125 / 3.2 24 1.5 in. / 38.1mm LD 42 2.0 0.406 / 10.3 0.219 / 5.6 20 43 3.0 0.593 / 15.1 0.219 / 5.6 20 45 5.0 0.937 / 23.8 0.343 / 8.7 18 47 7.0 1.280 / 32.5 0.343 / 8.7 18 40 10.0 1.900 / 48.3 0.406 / 10.3 18 (continued) 84 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 40 Series Ohmicone Silicone-Ceramic Conformal Axial Terminal Wirewound 1% and 5% Tolerance Standard OrDeriNG iNFOrmatiON Standard part numbers Wattage and Tolerance Wattage and Tolerance Wattage and Tolerance 1% Tolerance 5% Tolerance 1% Tolerance 5% Tolerance 1% Tolerance 5% Tolerance Part No. Part No. Part No. Prefix Prefix Prefix Suffix Suffix Suffix 0.1 R10 68 68R 2,200 2K2 0.15 R15 75 75R 2,500 2K5 0.2 R20 82 82R 2,700 2K7 0.25 R25 100 100 3,000 3K0 0.3 R30 120 120 3,300 3K3 0.33 R33 125 125 3,500 3K5 0.4 R40 150 150 3,900 3K9 0.5 R50 180 180 4,000 4K0 0.75 R75 200 200 4,500 4K5 1 1R0 220 220 4,700 4K7 1.5 1R5 225 225 5,000 5K0 2 2R0 250 250 6,000 6K0 2.2 2R2 270 270 6,800 6K8 3 3R0 300 300 7,000 7K0 4 4R0 330 330 7,500 7K5 5 5R0 350 350 8,000 8K0 7.5 7R5 390 390 9,000 9K0 10 10R 400 400 10,000 10K 12 12R 450 450 12,000 12K 15 15R 470 470 13,000 13K 18 18R 500 500 15,000 15K Shaded values 20 20R 560 560 17,000 17K involve ver y fine resistance wire 22 22R 600 600 20,000 20K and should not 25 25R 680 680 22,000 22K be used in criti- cal applications 27 27R 750 750 25,000 25K without burn-in 30 30R 800 800 30,000 30K and/or thermal cycling. 33 33R 820 820 33,000 33K 35 35R 900 900 35,000 35K 39 39R 1,000 1K0 40,000 40K 40 40R 1,100 1K1 50,000 50K 47 47R 1,200 1K2 = Standard values 50 50R 1,500 1K5 = Non-standard values subject to mini- 56 56R 1,800 1K8 mum handling charge per item 62 62R 2,000 2K0 40 Series Non-Inductive Ohmicone Winding Silicone Ceramic optional Conformal Axial (blank= std. RoHS Term. Wirewound winding) Compliant Tape & reel 41NJR10E-T optional pc/reel: Wattage Tolerance Resistance 41: 5000 1= 1W F= 1% R10= 0.10 2 J= 5% 1R0= 1.0 42: 1250 3 10R = 10.0 43: 1250 5 250 = 250 45: 1000 7 1K0= 1,000 47: 500 0= 10W 4K5= 4,500 40: 500 50K = 50,000 rev 3/19-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 85 Ohmic value 41F 1 43F 3 45F 5 40F 10 41J 1 42J 2 43J 3 45J 5 40J 10 Ohmic value 41F 1 43F 3 45F 5 40F 10 41J 1 42J 2 43J 3 45J 5 40J 10 Ohmic value 41F 1 43F 3 45F 5 40F 10 41J 1 42J 2 43J 3 45J 5 40J 10