MC4 Series High Voltage 4-Resistor SMD DIP Package featureS Ohmites MC4 Series offers 4 high voltage SMD resistors in a single DIP Unique terminals allow spacing package, supplied on tape and reel for between board and resistor automated placement. Each resistor pro- Design allows multiple configura- vides a rating of 0.75W with a maximum tions voltage of 2500 VDC. Designers can 2,500 volts max. per resistor specify up to 4 different resistor value/ per pack 10KV total tolerance combinations and connect then individually, in series, or parallel to derive Supplied on tape & reel for countless results. The flexible S-Bend ter- automated placement minals provide solder joint integrity while leaving space between the resistor pack and the PCB. Standard parts are available in single resistance values for immediate delivery. SerIeS SpeCIfICatIonS Resistance Power 25C Max. Operating Standard Temperature Coefficient Series Range (Ohms) per resistor Voltage 50PPM/C 100PPM/C MC4 200 to 5,000M 0.75W 2,500 200-250M 251M-5,000M CharaCterIStICS perforManCe data Characteristic Test Method Specification Resistor Thick film on Alumina Humidity MIL-STD-202, Method 103B, 0.25% Resistance Range 200 ohms to 5,000M Condition B Power Rating 0.75W per resistor, 3.0W total MIL-STD-202, Method 301, 0.25% Dielectric Withstanding 2500 VDC per resistor Voltage Rating 750V Voltage Tolerance 5% to 20% Insulation Resistance MIL-STD-202, Method 302, >10,000M or Condition A or B greater dry Operating -55C to +180C Temperature Thermal Shock MIL-STD-202, Method 107G, 0.20% Condition B, B-1, or F TCR and VCR see Slim Mox MIL-STD-202, Method 108A, 1.0% Load Life Solder Silver solder is recommended for Condition D MC4 resistors. Leaching of the silver in the termination will occur if Resistance to Solvents MIL-STD-202, Method 215G No degrada- non-silver solder is used. 60/40 tin- tion of coating lead solders are not recommended or marking for use with the MC4 product. Shock (Specified Pulse) MIL-STD-202, Method 213B, 0.25% Condition I Vibration, High MIL-STD-202, Method 204D, .020% Frequency Condition D Power Conditioning MIL-R-49462A, Par 4.8 0.50% poSSIble ConfIguratIonS 4 individual 2 pairs in parallel 3 in parallel 4 in series 2 in series 3 in series 2 pairs in series 4 in parallel 0.75W each 1.5W each 2.25W 3W 1.5W 2.25W 1.5W each 3W 2500 VDC each 2500 VDC each 2500 VDC 10,000 VDC 5000 VDC 7500 VDC 5000 VDC each 2500 VDC 1 individual 2 in parallel 1 individual 0.75W 1.5W 0.75W 2500 VDC 2500 VDC 2500 VDC 26 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.comMC4 Series High Voltage 4-Resistor SMD DIP Package dIMenSIonS (in./mm) Land Pattern 0.750 max. (19.05mm) 0.71 .01 0.740 (18.03mm) (18.8mm) R1 0.190 typ. 0.110 (4.8mm) (2.8mm) R2 0.75 .01 0.650 (19.05mm) (16.5mm) 0.080 R3 (2.0mm) R4 0.580 0.03 (14.7mm) (0.76mm) 0.080 (2.0mm) 0.676 (17.17mm) orderIng InforMatIon Tape and Reel Standard Part Numbers Tape and Reel Orientation optional E = RoHS compliant 250 per reel Part Description MC4-1003JER 100K ohms per resistor, 5% MC4-1002FER MC4-5003JER 500K ohms per resistor, 5% Tolerance MC4 Series Ohms MC4-1004JER 1M ohms per resistor, 5% J= 5% First 3 digits are K= 10% significant 4th digit is MC4-5004JER 5M ohms per resistor, 5% P= 20% multiplier ( of zeroes MC4-1005JER 10M ohms per resistor, 5% to follow). Examples: 1003 = 100K MC4-5005JER 50M ohms per resistor, 5% 5004 = 5M 1007 = 1G MC4-1006JER 100M ohms per resistor, 5% MC4-5006JER 500M ohms per resistor, 5% MC4-1007KER 1G ohms per resistor, 10% MC4-5007KER 5G ohms per resistor, 10% *Custom part numbers are assigned sequen- tially. MC4-SP0001, MC4-SP0002, etc. Go to this link to design your own MC4 resistor and have a unique part number assigned. www. ohmite.com/mc4sp/ Design online at: www.ohmite.com/mc4sp/ 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 27