MMC25F1005ETR Ohmite

Mini Macro chip series Features High Voltage Thick Film SMD Chip High Voltage Ratings Smaller Package Sizes Low Cost Wraparound Terminals series sPeciFicatiONs Series TCR Power Rating (W) Voltage Isolation (Size in./met.) Resistance Range ppm/C 70C Rating* Voltage MMC06 470~10M 100 0.1 200 100 (0603/1608) 47~464 200 MMC08 100~10M 1% & 2% 100 0.125 300 500 (0805/2012) 100~51M 5% & 10% 100 47~97.6 200 MMC12 100~10M 1% & 2% 100 0.25 400 500 (1206/3216) 100~51M 5% & 10% 100 47~97.6 200 MMC25 560~20M 1% & 2% 100 1.0 800 500 (2512/6332) 560~51M 5% & 10% 100 100~549 200 47~97.6 500~-200 *Use Ohms Law (V= P*R) to calculate maximum working voltage. Note: Limiting Element Voltage can only be applied to resistors when the resistance is equal to or higher than the critical resistance value. characteristics Prefered Number Series 1%, 2%: E96, E24 Derating for Resistors 5%, 10%: E24 100 Substrate Alumina Resistor Thick Film 80 Coating glass overcoat 60 100% nickel barrier inner layer with 100% matte tin outer Terminal layer 40 Tolerance 1-10% Derating Linearly from 100% at 70C to 0% at 125C 20 Isolation Voltage 500V (ex. MMC06: 100V) 0 -55~+125 Operating Temp. Range 0525 0 7075 100 125 Ambient Temperature, C (continued) 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 29 Percent Rated PowerMini Macro chip series High Voltage Thick Film SMD Chip diMeNsiONs (in./mm) L L W t A B Qty./Reel MMC06 0.063 .004 0.031 .006 0.018 .004 0.012 .004 0.012 .004 5000 W 1.6 0.1 0.8 0.15 0.45 0.1 0.3 0.1 0.3 0.1 MMC08 0.079 .004 0.049 .004 0.022 .004 0.016 .008 0.016 .008 5000 2.0 0.1 1.25 0.10 0.55 0.1 0.4 0.2 0.4 0.2 A MMC12 0.126 .004 0.063 .006 0.022 .004 0.020 .01 0.020 .01 5000 3.2 0.1 1.6 0.15 0.55 0.1 0.5 0.25 0.5 0.25 MMC25 0.248 .004 0.126 .006 0.022 .004 0.024 .008 0.024 .008 4000 t 6.3 0.1 3.2 0.15 0.55 0.1 0.6 0.2 0.6 0.2 B Land Pattern (in.) Dimensions are for reference only Size M N O L M N L MMC06 0.075 0.024 0.041 0.027 MMC08 0.095 0.032 0.069 0.031 MMC12 0.146 0.040 0.080 0.066 O MMC25 0.272 0.048 0.150 0.176 OrderiNg iNFOrMatiON RoHS Compliant MMC12J4704ETP Type Wattage Tolerance Resistance Packaging 06 = 0.1 F= 1% First 3 digits are TP = Paper tape 08 = 0.125 G= 2% significant 4th digit (use on MMC06, 12 = 0.25 J= 5% is multiplier ( of MMC08, MMC12) 25 = 1.0 K= 10% zeroes to follow). TR = Embossed tape Examples: (use on MMC25) 4704 = 4,700,000 1214 = 1,210,000 Use E96 values for 1% Use E24 values for 5% Note: Units are marked with 3-digit (E24 Series) or 4-digit (E96 Series). 4-digit marking not available on MMC06 sizes. 30 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com