MOX500 Series Epoxy Molded, Metal Glaze-Metal Oxide Resistors FeatureS Meets Mil-Std-202 Meets IEC 61000-4-5 up to 2KV Molded Construction Available in E96 values CharaCteriStiCS Resistor Type Thick Film, Epoxy Molded Characteristic Test Method R limits Power Rating 2W at 70C Moisture MIL-STD-202, Method 106G 0.20% 3W at 25C Resistance Metal Glaze:1.5K to 5M Resistance Range Humidity MIL-STD-202, Method 103, Condition B 0.25% Metal Oxide:15 to <1.5K MIL-STD-202, Method 213, Condition I 0.10% Shock Tolerance 1%, 2%, 5% Vibration MIL-STD-202, Method 204, Condition D 0.10% Temp. Coeff. Metal Glaze: 100/200ppm Terminal MIL-STD-202, Method 211A, Condition 0.10% Resistance Metal Oxide: 350ppm Strength A or B Not all tolerances and TCR values available Short Term DC test potential 2.5 time the rated con- 0.5% throughout entire resistance range Overload tinuous working voltage but not exceed- Metal glaze 100/200 ppm Construction ing twice the maximum voltage specified Metal oxide 350 ppm 1000 hrs at RCWV duty cycle 1.5hr ON, 2% Load Life Max. Working RCWV or 1000 V whichever lesser. (RCWV 0.5 hr OFF at 70C 2C Voltage = rated DC or RMS AC continuos working Temperature -65 to +125C 0.10% voltage at commercial line frequency and Cycling waveform (volt) ) Resistance to Temp 350C 10C for 3 0.5 sec 1% Diel. Width- 1000 VRMS soldering heat standing Volt. Surge IEC61000-4-5, waveform 1.2/50S, 10 <1% Copper Wire, Solder Coated axial, RoHS Terminals Immunity Pulses applied. Does not include values composition under 1K. Oper. Temp. -55 to +155C Derating Single Impulse Test Surge Immunity Test 100 100,000 5,000 80 2W 10,000 60 3W 40 1,000 20 0 100 -55 0 25 50 70 100 155 Ambient Temperature, C 10 500 1s 10s 100s 1ms 10ms 100ms 1s 1K 10K 100K 1M Pulse duration Resistance () Change in resistance under 1% Resistors are tested in accordance with IEC61000-4-5, waveform 1.2/50S, 10 Pulses applied. Limit of acceptance is a shift in resis- tance of less then 1% from the initial value. Graph data shows values equal or greather than 1K. DiMenSiOnS in./mm 0.570 max. / 14.5mm 0.032 .002 / 1.430 .075 / 0.8mm .05 36.3mm 1.9 *Total resistor length including leads approx. 70mm 0.205 .010 / for taped & reeled units 5.2mm .3 6 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Percent Rated Power Power (watts) Peak Voltage (V)MOX500 Series Epoxy Molded, Metal Glaze-Metal Oxide Resistors t ape & reel EIA-296 standard 6mm 1 14 2.82 max. 56.5mm 1.5 2.88 10mm 0.5 1.13 0.80mm max. L L 1 2 L L = 1.4mm max. 1 2 OrDerinG inFOrMatiOn Tolerance Standard part numbers for MOX500 Series F = 1% G = 2% RoHS Resistance 2% tolerance 5% tolerance J = 5% compliant 100 MOX500100RJSE 150 MOX500150RJSE MOX5001001FSETR 270 MOX500270RJSE 1K MOX5001001JSE Resistor Ohms TCR Tape & reel 1.5K MOX5001501JSE Series First 3 digits are S = 100ppm/C TR = 1250 pcs significant 4th L = 200ppm/C 2.7K MOX5002701GSE 3.3K MOX5003301JSE digit is multiplier K = 350ppm/C 4.3K MOX5004301JSE ( of zeros to follow). 6.8K MOX5006801JSE examples: 7.5K MOX5007501GSE 10R0 = 10 ohms 1001 = 1000 ohms 10K MOX5001002JSE 1502 = 15000 ohms 15K MOX5001502JSE 18K MOX5001802JSE 20K MOX5002002GSE 27K MOX5002702GSE 33K MOX5003302JSE 47K MOX5004702GSE 66K MOX5006602JSE 100K MOX5001003GSE 150K MOX5001503GSE 220K MOX5002203GSE 270K MOX5002703GSE 330K MOX5003303GSE 1M MOX5001004GSE rev 10/17-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 7