OX/OY Series Ceramic Composition 10% Tolerance FeatureS The OX/OY Series of fixed ceramic resistors are ideal for Replaces 1 and 2 watt circuitry associated with surges, carbon composition high peak power or high energy. resistors They offer enhanced perfor- Meets high energy mance in high voltage power density demands supplies, R-C snubber circuits, High peak power and inrush limiters. The OX/ OY resistors can often replace 10% Tolerance carbon composition resistors which can be difficult to source. SerIeS SPeCIFICatIONS Series Watts max.* Resistance range Joules max.** Max. working volts OX 1 3.3-100K 50 300 OY 2 3.3-1M 80 400 * at 70C. **For a single impulse. CharaCterIStICS Terminals Pb-free solder-coated axial Test Condition Maximum R Coating Silicone ceramic Life Test MIL-STD-202, Method 108 5% Derating Linear from 100% +70C to Short Time Overload 2x rated V, 5 sec ON 70C (2% +0.05) 0% +200C 1 20,000 cycles. See circuit for test 5% Resistance to Pulse Operating Temp. -40C to +220C conditions Range Thermal Shock MIL-STD-202, Method 107 (2% 0.05) Tolerance 10% standard Moisture Resistance 1000 hrs 40C, 5% Power Rating Based on 70C free air rating 90 - 95% RH Temperature -1300 300ppm/C. Coefficient Resistance to Pulse OX OY 0.80% DC 20KV OY Series see circuit for Max Working Voltage 300V 400V test conditions 0.60% 10 Kohms Dielectric Strength 500V 700V 0.40% Max Overload Voltage 600V 800V 1 Max Pulse Voltage 14KV 20KV 0.20% 1 Kohm 100 ohms Pulse Tolerance, 1240V 52F, 1640V 52F, 0.00% 100 pulses 40J/ 35 sec. 70J/35 sec. 0 100 1,000 10,000 20,000 Cycles 1 See figures 0.80% DC 14KV OX Series see circuit for test conditions 1 sec. on / 1 sec. off 0.60% 10 Kohms 14KV and 20KV val- 0.40% 10 kohm ues used in circuit as Max. Pulse shown full voltage 1000 pF R.U.T. 0.20% Voltage not applied directly to 1 Kohm resistor. 100 ohms 0.00% 0 100 1,000 10,000 20,000 Cycles (continued) 56 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com R/R R/R OX/OY Series Ceramic Composition 10% Tolerance dImeNSIONS in./mm Tape and Reel Dimensions 1.50 .118 0.031 nom. LD 2.5mm 13 38.0mm 3* 3 (0.8mm) max. 6.2mm .5 63mm 1 *approx. 27mm for taped & reeled units C 2.88 10.16mm .80 Length L Length C Diameter D Qty. per 1.13 Series .039 (1.0) max039 (1.0) reel OX 0.65 / 16.5 0.748 / 19.0 0.217 / 5.5 1000 0.80mm OY 0.748 / 19.0 0.886 / 22.5 0.276 / 7.0 500 max. L L 1 2 L L = 1mm max. 1 2 OrderINg INFOrmatION Standard part numbers for OX/OY Series Wattage Wattage Wattage Wattage Wattage Wattage Part No. Part No. Part No. Part No. Part No. Part No. Prefix Prefix Prefix Prefix Prefix Prefix Suffix Suffix Suffix Suffix Suffix Suffix 3.3 33GKE 27 270KE 220 221KE 15000 153KE 120000 124KE 1800 182KE 3.9 39GKE 33 330KE 270 271KE 18000 183KE 150000 154KE 2200 222KE 4.7 47GKE 39 390KE 330 331KE 22000 223KE 180000 184KE 2700 272KE 5.6 56GKE 47 470KE 390 391KE 27000 273KE 220000 224KE 3300 332KE 6.8 68GKE 56 560KE 470 471KE 33000 333KE 270000 274KE 3900 392KE 8.2 82GKE 68 680KE 560 561KE 39000 393KE 330000 334KE 4700 472KE 10 100KE 82 820KE 680 681KE 47000 473KE 390000 394KE 5600 562KE 12 120KE 100 101KE 820 821KE 56000 563KE 470000 474KE 6800 682KE 15 150KE 120 121KE 1000 102KE 68000 683KE 560000 564KE 8200 822KE 18 180KE 150 151KE 1200 122KE 82000 823KE 680000 684KE 10000 103KE 22 220KE 180 181KE 1500 152KE 100000 104KE 820000 824KE 12000 123KE 1 MEG 105KE Packaging TR = tape & reel RoHS Compliant B = bulk OX82GKE -TR Size Ohm Value Tolerance OX =1W Example: K= 10% Standard OY =2W 33G = 3.3 Ohms 330 = 33 Ohms 331 = 330 Ohms rev 4/20-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 57 Ohmic value OX 1 OY 2 Ohmic value OX 1 OY 2 Ohmic value OX 1 OY 2 Ohmic value OX 1 OY 2 Ohmic value OX 1 OY 2 Ohmic value OX 1 OY 2