RW Series High Power SMD Wirewound Resistors 5 and 7 watt FeatuReS Ohmite has used its thermal management expertise to produce a unique resistor design. The resistor Finned design facilitates cooling body incorporates fins identical to a heatsink. These High Power Density fins, as with a heatsink, increase the sur face area of Wide Resistance Range the part and allow for greater power dissipation. This unique design allows a small footprint for the SMD Tight Tolerance device and a high power dissipation. These 5 and 7 Low TCR watt resistors are extremely stable with a load life drift of only 1%. A special flat has been designed in to the part for pick and place operations. chaRacteRiSticS RW5S0 RW7S0 Derating Power at 25C 7 watts 10 watts 100 at 70C 5 watts 7 watts 70 80 Resistance range 0.1 ~ 50K 0.1 ~ 100K 60 Non-inductive range 0.1 ~ 12.5K 0.1 ~ 20K 40 0.5%, 1%, 5% Tolerance 20 Temperature Coefficient 0.1 ~ 0.99: 90ppm 1 ~ 10: 50ppm 0 10+: 20ppm 0 25 50 75 100 125 150 Ambient Temperature, Co Operating temp. range -55C ~ +155C 1/2 Max. working voltage (PxR) 5.67g 11.34g Weight PeRFoRmance Data Temp. cycle (-55C to 125C, 1000 cycles) 0.5%+.05 (1000 hours at 25C) 1.0%+.05 Load Life Immersion (260C for 10 sec.) 0.1%+.05 Leaching (260C Solder immersion, 60 sec.) No visible leaching Thermal Shock (Units at -55C, then rated power applied) No mechanical damage Flammability UL Material rating UL94V0 (continued) 36 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Percent Rated PowerRW Series High Power SMD Wirewound Resistors 5 and 7 watt DimenSionS 0.020 in. / 0.51 mm Tape and Reel Overall Dimensions FA (5S0) FB (7S0 ) Length Width Height Reel Hub Diameter 77mm 77mm RW5S0 0.806 / 20.47 0.365 / 9.27 0.406 / 10.31 Reel Outer Diameter 560mm 560mm RW7S0 1.128 / 28.65 0.471 / 11.96 0.51 / 12.95 Reel Width 46mm 46mm Tape Width 44mm 44mm Land Pattern Pitch 20mm 24mm L M N O 5S0 (FA) 0.600 / 15.24 1.000 / 25.40 0.200 / 5.08 0.450 / 11.43 7S0 (FB) 0.890 / 22.61 1.330 / 29.59 0.220 / 5.59 0.520 / 13.21 M Power Rating and Temperature Rise N L data based on the recommended Land Patterns using 10 oz. copper PCB. FR-4 material. 0.062 thick. 4 layer. O oRDeRing inFoRmation Standard part numbers For RW Series Package Tolerance FA = 5W D = 0.50% FB = 7W F= 1% T = Tape Resistance Tolerance Part Number Type of Base J= 5% Package Modifier and Reel Component type S = standard 0.10 1% RW5S0FAR100FE A, B sequential (optional) R = resistor 5W=300/reel 1.0 1% RW5S0FA1R00FE 7W=200/reel 10 5% RW5S0FA10R0JE RW5S0FA1K00FET 20 5% RW5S0FA20R0JE E = RoHS compliant 47 5% RW5S0FA47R0JE Wattage 70C 25C Resistance Value Component Modifier W = wirewound 5S0 = 5W 7W R = Decimal Examples: 100 5% RW5S0FA100RJE 7S0 = 7W 10W K = 1,000 R249 = 0.249 ohms 470 5% RW5S0FA470RJE M = 1,000,000 24R9 = 24.9 ohms 1000 5% RW5S0FA1K00JE 2K49 = 2,490 ohms 4700 5% RW5S0FA4K70JE 10,000 5% RW5S0FA10K0JE 1.0 1% RW7S0FB1R00FE 10 1% RW7S0FB10R0FE 100 1% RW7S0FB100RFE 1000 1% RW7S0FB1K00FE 10,000 1% RW7S0FB10K0FE 100,000 1% RW7S0FB100KFE 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 37