Rated power, watts P600 at series 600 Watt Heat Sinkable Planar Features Ohmites TAP600 delivers 600 watts of reliable power to a Dielectric Strength up to 12KV variety of power conditioning, Special Design for Low Inductance and power transmission, and power Capacitance Values control applications. These resis- Contacts allow for easy load connec- tors can be designed for liquid tion with M5 screws (not included) or air cooled heat sink systems. available with M4 as special request. Applications include variable Thread depth 7mm speed drives, power supplies, robotics, motor control, and other Encapsulated with a special resin filled control devices. epoxy casing with a large creepage distance to mass, large air distance between terminals, and a high insula- tion resistance (CTI 600). Materials meet the requirements of UL94-V0 characteristics Resistance Values 0.25 to 100K Typical Results - R Test Method Resistance Tolerance 10% Std., 5% available on request. Short Time 1000 W/10 Sec. 0.4% Temperature Coefficient 150ppm/C (others upon request) Overload 70C 5,000V DC, higher voltage on request, not Maximum Working Voltage Humidity Steady 56 Days/40C/ 95C 0.25% exceeding max. power State Power Rating 600W at 70C heat sink temperature or -55/+125/5 Cycles 0.20% Temp. Cycling 85C bottom case temperature. This value is only valid by using a thermal conduction Shock 40g/4,000 Times 0.25% to the heat sink Rth -cs<0.025C/W. Vibrations 2 - 500Hz/10g 0.25% The value can be reached by using thermal Load Life 1,000 Pn 30 min. ON/30 0.40% transfer compound with a heat conductivity Cycles min. OFF of 1w/mk. The flatness of the cooling plate must be better than 0.05mm overall. The Terminal Strength 200N 0.05% roughness of the surface should not exceed of Contacts 6.4m. Dielectric Strength Voltage 6k Vrms, 50Hz, 1min standard up to 12k Derating Vrms available Single Shot Voltage Up to 12KV Normwave (1.5/50 sec) 120 720 Insulation Resistance 10G min. at 500V 100 600 Creeping Distance 42mm min. 80 480 Air Distance 14mm min. 80nH Inductance 60 360 Capacitance/Mass 110pF 40 240 Capacitance/Parallel 40pF Operation Temperature -55C to +150C 20 120 Max. Torque for Contacts 2 Nm 0 0 1.8 Nm Max. Torque for Mounting 0 25 50 75 100 125 150 175 Bottom of base plate Temperature, C Derating (thermal resist.) 8.73W/C (0.115C/W) (continued) 140 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Percent rated power0.1770.216 (4.55.5mm) P600 at series 600 Watt Heat Sinkable Planar dimensions (iin./mm) 0.1590.169 M5 (4.054.3mm) 2.3312.394 occ. Din (59.260.8mm) *Also C to C L L dimension for mounting holes 0.6890.728 (17.518.5mm) *2.2362.252 (56.857.2mm) 1.3311.346 (33.834.2mm) 2.5272.591 (64.265.8mm) 1.4091.425 (35.836.2mm) 0.2950.335 0.1770.216 (7.58.5mm) (4.55.5mm) 1.2401.279 1.1611.201 (31.532.5mm) (29.530.5mm) * * *Dimensions are taken while part is 0.571610 mounted to a proper heatsink (14.515.5mm) * ordering inFormation RoHS compliant Non-compliant version Standard Values unavailable 10% tol. 5% tol. 0.10 1.0 15 500 TAP600K5R0E TAP600KR25E TAP600J1R0E TAP600K4R0E TAP600K5R0E TAP600KR33E TAP600J10RE TAP600K40RE TAP600K7K5E Style Tolerance Resistance TAP600KR50E TAP600J50RE TAP600K20RE TAP600K7R5E J = 5% 1 Ohm = 1R0 TAP600K100E TAP600J100E TAP600K200E TAP600K75RE K = 10%, Std. 10 Ohm = 10R TAP600K10KE TAP600J500E TAP600K22RE TAP600K750E L = 20% 1000 Ohm = 1K0 TAP600K10RE TAP600J1K0E TAP600K2R0E TAP600K30RE TAP600K1K0E TAP600K3R0E TAP600K500E TAP600K1R0E TAP600K50RE THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to es- tablish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resis- tor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor. The Ohmite CP4 (