FEa TurES TEH100 Series 100 Watt power rating at 25C case temperature 100 Watt Thick Film Power Resistors for High Non-inductive performance Frequency and Pulse Loading Applications Low thermal resistance RoHS compliant design Ohmite offers the totally TO-247 package configura- encapsulated and insulated tion TO-247 package for low ohmic value and non-induc- Single screw mounting tive design for high-frequen- simplifies attach-ment to cy and pulsing applications. the heat sink Ideal use is for power sup- A totally molded housing plies. This series is rated for enviromental protection at 100 Watts mounted to a Non-Inductive design heat sink. Resistor package totally insulated from heat sink cHaracTEriSTicS Resistor thick film on alumina Test Conditions Of Test Performance Case high temperature plastic Load life MIL-R-39009D 4.8.13 , 2,000 R (1.0% + 0.0005) hours at rated power Lead Material Tinned Copper Moisture resis- -10C - +65C, RH>90%, cycle R (0.50% + 0.0005) Installation, max. 0.9 Nm using an M3 screw and a tance 240 h Torque compression washer Short time 1.5 times rated power and R (0.50% + 0.0005) Derating linear, 100% at 25C to 0% at overload V(DC) 1.5Vmax for 5 seconds 175C Thermal shock GJB360A-96 method 107, R (0.50% + 0.0005) Resistance range 0.05 to 1M, other values on Cond. F request GJB360A-96 method 301, R (0.15% + 0.0005) Dielectric Resistance tol. 1%, 2%, 5%, 10% (1,800V AC, 60s) strength Max. working voltage 350V Terminal GJB360A-96 method 211, R (0.20% + 0.0005) Temperature >10: 50ppm/C, ref. to 25C strength Cond. A (Pull Test) 2.4N Coefficient 3 to 10: 100ppm/C High frequency GJB360A-96 method 204, R (0.40% + 0.0005) 1 to 2.99: 250ppm/C vibration Cond. D <1: 500-1000+ppm/C (Contact factory for exact values below Derating 1) 100 10G min. Insulation Resistance Dielectric Strength 1,800 VAC 80 60 THIS PRODUCT IS DESIGNED FOR 40 USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be 20 monitored and kept within specified limits to establish the power rating. Best technique is to attach a ther- 0 0 25 50 75 100 125 150 175 mocouple to the side of the base plate of the resistor. Bottom of base plate Temperature, C Temperature of plastic housing or heat sink cannot be Derating (thermal resistance): 0.666W/K (1.5K/W). Without a heatsink, when in free air at used to establish rating of the resistor. 25C, the TEH100 is rated for 3.5W. Derating for temp. above 25C is 0.0234W/K. Graphed value is only valid when using a thermal conduction to the heatsink Rth- cs<0.025K/W. This value can be reached by using thermal transfer compound with a heat conductivity of 1W/mK. The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4m. The case temperature is to be used for the definitiion of the applied power limit. The case temperature measurement must be made with a thermocouple contacting the center of the component mounted on the designed heat sink. Thermal grease should be applied properly (continued) 152 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Percent Rated PowerTEH100 Series 100 Watt Thick Film Power Resistors for High Frequency and Pulse Loading Applications dimEnSionS (in./mm) 0.610~0.630 0.185~0.205 (15.49~16.01mm) (4.69~5.21mm) 0.200~0.220 (5.07~5.59mm) 0.805~0.825 (20.44~20.96mm) 0.139~0.147 (3.53~3.73mm) 0.080~0.140 (2.03~3.55mm) 0.520~0.620 M option (13.21~15.75mm) 0.136~0.150 0.807~0.886 L option (3.45~3.81mm) (20.50~22.50mm) 0.022~0.042 (0.55~1.07mm) M 0.054~0.066 0.085~0.105 (1.37~1.67mm) (2.15~2.67mm) L 0.390~0.410 0.042~0.054 (9.90~10.42mm) (1.07-1.37mm) ordEring inForma Tion Package Code RoHS Compliant M = standard Non-compliant L = long terminals version unavailble TEH100M10R0JE Series Ohms Tolerance R = Decimal F= 1% Example: J= 5% 2R50 = 2.50 25R0= 25 100R = 100 1K00 = 1000 Standard part numbers Ohms 5% tolerance 1% tolerance 0.05 TEH100MR050JE 0.075 TEH100MR075JE 0.1 TEH100MR100JE 0.2 TEH100MR200JE 0.5 TEH100MR500JE 1 TEH100M1R00JE TEH100M1R00FE 2 TEH100M2R00JE TEH100M2R00FE 2.5 TEH100M2R50JE TEH100M2R50FE 3 TEH100M3R00JE TEH100M3R00FE 5 TEH100M5R00JE TEH100M5R00FE 7.5 TEH100M7R50JE TEH100M7R50FE 10 TEH100M10R0JE TEH100M10R0FE 15 TEH100M15R0JE TEH100M15R0FE 20 TEH100M20R0JE TEH100M20R0FE 25 TEH100M25R0JE TEH100M25R0FE 50 TEH100M50R0JE TEH100M50R0FE 100 TEH100M100RJE TEH100M100RFE 270 TEH100M270RJE 470 TEH100M470RJE 750 TEH100M750RJE 1K TEH100M1K00JE 5K TEH100M5K00JE 7.5K TEH100M7K50JE 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 153