TGHGCR0500FE Ohmite

TGHG Series Precision Current Sense Resistors Fea TureS The TGHG Series uses Resistance values beginning at 0.5m state of the art technol- Non Inductive ogy to provide highly Four terminal Kelvin connection reliable, non inductive performance. This resis- SOT 227 Package tor is ideal for many Four terminals to isolate measurement path current monitoring and from current flow path controls applications. Accuracy in a high power package cHaracTeriSTicS Nickel-plated copper Derating Heat Sink Terminal Nuts American standard 303 stainless steel Type: G 100 100 Standard Resistance Values 0.5m-1, others on request 80 80 Resistance Tolerances 0.5% (0.0005 thru 0.022), 1%, 5% 60 60 Temperature Coefficient referenced to 25C, R taken at -15C and +105C, 40 40 <60ppm/C <500ppm/C for resistance range 27m-49m) 20 20 Power Rating 100W at 70C case temperature 150Amp permanent not to 0 0 exceed Ohms Law power load. 0 2550 70 100 125 150 175 Bottom of base plate Temperature, C Dielectric strength 1000VDC, higher value on request Heat Resistance Rth <0.56K/W Best results can be reached by using a thermal transfer compound Protection class acc. to IEC 950/CSA22.2 950/M -89 and EN 60950.88:2 with a heat conductivity of better Working Temp. Range -55C to +155C than 1W/mK Max. Torque for Contacts 1.3Nm 8 (static) Max Torque for Base Plate 1.5 Nm (static) THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to es- tablish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resis- tor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor. (continued) 156 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Percent Rated Power Rated Power, WTGHG Series Precision Current Sense Resistors dimenSionS 1.496 .012 (38mm .3) 0.472 .008 (12mm .2) 1.24 .02 (31.5mm .5) 0.315 .008 0.078 .002 (8mm .2) (2mm .05) 0.031 .002 S S (0.8mm .05) 0.157 min. 0.165 .004 (4.0mm) (4.2mm .1) diam. 0.5 .02 0.98 .2 (12.7mm .5) (24.9mm .5) C C 0.209 min. (5.3mm) M4 0.59 .008 (15mm 0.2) 0.354 .004 1.189 .004 (9mm .1) (30.2mm .1) C = current connection (source) S = voltage connection (sense) orderinG inForma Tion Standard part numbers Configuration C = current sense E = RoHS compliant Ohms 100 Watt 0.5% 100 Watt 1% 0.00050 TGHGCR0005FE 0.00100 TGHGCR0010DE TGHGCR0010FE TGHGCR0200FE 0.00200 TGHGCR0020DE TGHGCR0020FE 0.00500 TGHGCR0050DE TGHGCR0050FE TGH = series Wattage Resistance Value Tolerance 0.01000 TGHGCR0100DE TGHGCR0100FE G= 100W Example: D= 0.5% R0200=0.02 ohms F = 1% 0.01500 TGHGCR0150FE J = 5% 0.02000 TGHGCR0200DE TGHGCR0200FE 0.02500 TGHGCR0250FE 0.05000 TGHGCR0500FE 0.0750 TGHGCR0750FE 0.1000 TGHGCR1000FE rev 10/18-1 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com 157