TNP10 Series Thin Film TO-126 Resistor Ohmite offers a high power heatsinkable TO-126 packaged This product has been resistor. They can achieve 1W in free air and 10W when DISCONTINUED attached to a proper heatsink. The non-inductive design is ideal for high speed circuits. These models exhibit low noise, high frequency operation and high density installation. Applications include: Constant current sources, electronic load circuits, LSI tests, measurement, audio PA systems and motor control. SPecifica TioNS Resistance TCR Heat Series Wattage* Range () Tolerance (ppm/C) Resistance** 0.09-0.1 5% (J) 250 TNP10S 10W 0.1-9.1 1% (F), 5% (J) 100 5.9C/W 10-51K 1% (F) 50 * Flange temp. -55 - 25C 1W at free air **From hot spot to flange characTeriSTicS Values listed below others on request Resistance Range Item Performance Condition Temp. Range -55C to +155C Dielectric 2000VAC 60 sec., between termi- Withstanding nals and flange Rated Temperature +25C Voltage Rated Power 10W (-55 to 25C flange temperature), Insulation Over 1000M Between terminals and 1W free air Resistance flange Moisture (1.0%+0.05) 60C, 90 to 95%RH, DC Derating Temperature Rise Resistance 0.1W, 1000 hrs. Load Life (1.0%+0.05) 25C, 90min. ON, 30min. 10 120 OFF, 1000hrs 25 8 90 Soldering Heat (1.0%+0.05) 350 5C, 3 sec. 6 60 Solderability Over 95% of surface 230 5C, 3 sec. 4 30 Vibration 0.25% IEC 60068-2-6 2 0 0 -55 0 50 100 155 200 0 2.5 5 7.5 10 Flange Temp. (C) Applied Power (W) *with 2.8K/W heatsink THIS PRODUCT IS DESIGNED FOR USE WITH PROPER Coonstruction HEATSINKING. Maximum base plate temperature of the resistor Leads (tin plated Cu) must be monitored and kept within speci- Molding (epoxy UL94-VO) fied limits to establish the power rating. Best Conductor (Cu) technique is to attach a thermocouple to the side Resistor (Ni-Cr or RuO) of the base plate of the resistor. Temperature of Substrate (alumina) plastic housing or heat sink cannot be used to Flange (Ni plated Cu) establish rating of the resistor. (continued) 152 1-866-9-OHMITE Intl 1-847-258-0300 Fax 1-847-574-7522 www.ohmite.com info ohmite.com Rating Power* (W) Temperature Rise (C)TNP10 Series Thin Film TO-126 Resistor dimeNSioNS (in./mm) 0.33 0.12 (8.5mm .2) (3.1mm .2) 0.15 (3.8mm .2) 0.47 (12.0mm .2) 0.12 (3.1mm .1) 0.13 (3.2mm .5) 0.67 0.6 (17.0mm 1.0) (1.40mm .05) 0.02 (0.5mm .05) 0.02 (0.6mm .05) 0.07 (1.75mm .1) 0.20 (5.08mm .05) orderiNg iNforma TioN Tolerance Standard part numbers F = 1% J = 5% Other values on request TNP10SHR100JE TNP10SA5R00FE TNP10SC75R0FE TNP10SC50R0FE TNP10SHR150JE TNP10SA7R50FE TNP10SC100RFE TNP10SAR200JE TNP10SC10R0FE TNP10SC120RFE Series TCR Resistance RoHS TNP10SHR250JE TNP10SC12R0FE TNP10SC150RFE H = 250ppm R500 = 0.500 compliant TNP10SHR330JE TNP10SC15R0FE TNP10SC200RFE A = 100ppm 1R00 = 1 C = 50ppm 250R = 250 TNP10SAR500JE TNP10SC20R0FE TNP10SC330RFE This product has been 1K00 = 1,000 TNP10SA1R00FE TNP10SC25R0FE TNP10SC560RFE 25K5 = 25,500 TNP10SA1R50FE TNP10SC27R0FE TNP10SC1K00FE DISCONTINUED TNP10SA2R00FE TNP10SC47R0FE TNP10SC10K0FE TNP10SA3R00FE TNP10SC50R0FE aSSocia Ted ParTS TNP10 resistors may be mounted with Ohmite C Series (parts C126-XXX) heatsinks: