67 m Otec o rder data on page 156 La RGE INTERfa CE Pa NEL protection class Ip 40 the product your advantage With front / rear panel or with slo- ping control panel and rear panel. Generously dimensioned, comfor- Modern and fashionable design. table control and interface panels Max. size of pc B (l x W in mm) distinguish the Mo TEC desktop Different heights of cases for top / bottom part device from conventional systems. individual configurations. S 128 x 90 m 178 x 125 Different sizes and combinations Guide grooves for the vertical L 208 x 150 offer a wide selection of attractive insertion of partitions and printed cases. circuit boards. Thanks to an innovative snap-in Sloping control panel with recessed H system, you can minimise your area to protect membrane keyboards assembly work and at the same time available as an accessory. improve the visual attractiveness of W D your products. High-quality material a BS, optionally in UL 94 HB or UL 94 V-0 flame-resistant. detailed drawings see our website www.okw.com Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 10/12e Copyright 2012 OKW Gehusesysteme156 Mo TEC Information on page 67 motec Part-No. ABS (UL 94 HB) ABS (UL 94 V-0) Outside dim. in mm Version / Equipment (dim. in mm) off-white off-white 1 motec W D H case shells base/top handle bar* RAL 9002 RAL 9002 S 155 105 40 flat / flat B 30 15 117 B 30 15 217 155 105 65 flat / high B 30 15 127 B 30 15 227 155 105 90 high / high B 30 15 137 B 30 15 237 M 205 140 50 flat / flat B 30 20 117 B 30 20 217 205 140 75 flat / high B 30 20 127 B 30 20 227 205 140 75 flat / high (Tilt/swivel handle adjustable in increments 30) B 30 20 147 205 140 100 high / high B 30 20 137 B 30 20 237 L 235 165 60 flat / flat B 30 23 117 B 30 23 217 235 165 85 flat / high B 30 23 127 B 30 23 227 235 165 85 flat / high (Tilt/swivel handle adjustable in increments 30) B 30 23 147 235 165 110 high / high B 30 23 137 B 30 23 237 motec Accesso RIes Part-No. Article For MOTEC Version / Application ABS (UL 94 HB) ABS (UL 94 V-0) a Sloping control panel S flat / high off-white, RAL 9002, max. dim. keypad 137.80 x 46.80 mm, insertion into the guides B 31 15 167 B 31 15 267 M flat / high off-white, RAL 9002, max. dim. keypad 186.70 x 54.40 mm, insertion into the guides B 31 20 167 B 31 20 267 L flat / high off-white, RAL 9002, max. dim. keypad 214.70 x 62.90 mm, insertion into the guides B 31 23 167 B 31 23 267 L high / high off-white, RAL 9002, max. dim. keypad 214.60 x 90.60 mm, insertion into the guides B 31 23 177 B 31 23 277 b Front / rear panel S flat / flat matt anodised aluminium, 136 x 32 x 1.5 mm, insertion into the guides, 1 pc B 31 15 100 S flat / high matt anodised aluminium, 136 x 57 x 1.5 mm, insertion into the guides, 1 pc B 31 15 110 S high / high matt anodised aluminium, 136 x 82 x 1.5 mm, insertion into the guides, 1 pc B 31 15 120 M flat / flat matt anodised aluminium, 185 x 42 x 1.5 mm, insertion into the guides, 1 pc B 31 20 100 M flat/ high matt anodised aluminium, 185 x 67 x 1.5 mm, insertion into the guides, 1 pc B 31 20 110 M high / high matt anodised aluminium, 185 x 92 x 1.5 mm, insertion into the guides, 1 pc B 31 20 120 L flat / flat matt anodised aluminium, 214 x 52 x 1.5 mm, insertion into the guides, 1 pc B 31 23 100 L flat / high matt anodised aluminium, 214 x 77 x 1.5 mm, insertion into the guides, 1 pc B 31 23 110 L high / high matt anodised aluminium, 214 x 102 x 1.5 mm, insertion into the guides, 1 pc B 31 23 120 c Set of screws S, M, L 4 x 2.5 x 6 mm, for mounting PCBs A 91 99 008 a b c universal accessories on pages 178-187 1 * side arms and push button of reinforced polyamide, middle section aluminium profile the mounting of the handle bar to the side panels with draft will hardly affect the load capacity and performance Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 10/12e Copyright 2012 OKW Gehusesysteme