Quick Delivery on Custom Lead Wire Lengths Advanced-Design Surface- Mount RTD Provides Class A Accuracy Stick-On or Cement-On to Target Device 260C (500F) Continuous Operation Self-Adhesive or Cement-On Use on Flat or Curved Surfaces SA1-RTD Class A accuracy of 0.06 at 0C. Thin film element is 2 x 2 x 0.8 mm in a 25 x 19 mm self-adhesive carrier. U 100 DIN Class A (0.06 or 0.15C at 0C) 1 m (40 ), 26 AWG stranded nickel- Accuracy Standard plated copper, PFA-insulated and U Easy-Installation jacketed cable. Silicone-Based, Self-Adhesive Backing Rated to 260C (500F) U Sensor Can be Reapplied U 290C (554F) Short- Term Operation When Used as a Cement-On SA1-RTD shown (OMEGABOND Air actual size. Set Cements) U Stripped 3- or 4-Wire Leads Standard (Connectors Optional) U Stocked in 1 m (40 ) Lengths Also Available in 2 and 3 m (80 and 120 ) and Custom Length Lead Wires U Other Resistances/ heat test insulation capabilities and Accuracies Available check other applications in which Available with on Request surface and/or gradient temperatures Stainless Steel need to be monitored or controlled. Overbraid The SA1-RTD surface-mount RTD temperature sensor mounts on flat Specifications or curved surfaces and provides Minimum/Maximum Temperature: Class A accuracy for critical -73C to 260C (-100F to 500F) temperature monitoring applications. continuous, 290C (554F) short-term Based on a 2 x 2 x 0.8 mm thin-film (when cemented in place) platinum RTD and supplied in Sensing Element: 100 at 0C (32F), PFA-insulated 3- or 4-wire temp coefficient of 0.00385 //C configurations (connectors optional), (IEC60751) it can be customized for use in Accuracy: a wide variety of applications. 0.06 at 0C (DIN Class A) The sensor can be easily applied For applications where electrical noise Stability: Less than 0.2C drift/year using its self-adhesive backing, is prevalent, or where the sensor lead wires may be routed around or permanently mounted using Response Time: Less than 0.9 s (63% sharp objects, consider the stainless OMEGABOND cements. response time in water immersion), less steel overbraid option. To specify this than 2 s response time on a hot plate option, add -SB to the end of the Use the SA1-RTD to monitor chip, model number for an additional cost Self-Heating Effect: 2.5 mW/C heat sink, and environmental per meter (foot). Ordering example: Lead Wire: 1 m (40 ), 26 AWG stranded temperatures in electronic devices SA1-RTD-80-SB. nickel-plated copper, PFA-insulated and check piping or ducting temperatures jacketed cable monitor motor and transformer core C-107 Extra Accuracy for Critical Measurements The Self-Adhesive Backing is Ideal for Targeted Class A Sensor Elements on Curved and Flat Surfaces. IEC 751 Class A/B Standard Tolerances Tolerance C Temp. Class A Class B in C C C -200 0.55 0.24 1.3 0.56 -100 0.35 0.14 0.8 0.32 0.0 0.15 0.06 0.3 0.12 100 0.35 0.13 0.8 0.30 200 0.55 0.20 1.3 0.48 300 0.75 0.27 1.8 0.64 The self-adhesive sensor is ideal for 400 0.95 0.33 2.3 0.79 targeted placement on curved or flat 500 1.15 0.38 2.8 0.93 surfaces. Once in place, it can be used 600 1.35 0.43 3.3 1.06 as is for measuring temperatures in The IEC-751/BS EN60751 1996 standard applications such as machine tools, tolerances for Pt 100 RTD elements. electronic products, structures or other Class A devices have an accuracy of places where temperatures need to be 0.35 at 100C. monitored and controlled. HH804U handheld, shown smaller than actual size, visit omega.com/ hh804 805 All products shown smaller than actual size. TA4F OMEGABOND , connector OM-SQ2020-2F8 Visit omega.com included data logger shown with meter. smaller than actual size, visit omega.com/ om-sq2020 OMEGABOND for Permanent Mounting Options Model No. Description OB-100-16 O MEGABOND 100: 1 lb kit, fast-setting, 2-part epoxy (sets in 8 to 12 min) 130C (265F) maximum OB-200-16 OMEGABOND 200: 1 lb kit, high temperature, 2-part epoxy 260C (500F) maximum OB-700 OMEGABOND 700: powder, 8 fluid oz (one part cement just mix with water) 871C (1600F) To Order Visit omega.com/sa1-rtd for Pricing and Details Model Number Style Length: m (inch) Cold End Termination SA1-RTD 3-wire 1 (40) 1 Stripped leads, 1 2 (1 insulated, SA1-RTD-80 3-wire 2 (80) 1 singles 2 bare), 3 wires SA1-RTD-120 3-wire 3 (120) SA1-RTD-MTP 3-wire 1 (40) MTP style miniature flat 3-pin SA1-RTD-80-MTP 2 (80) 3-wire connector SA1-RTD-120-MTP 3-wire 3 (120) SA1-RTD-4W 4-wire 1 (40) 1 Stripped leads, 1 2 (1 insulated, SA1-RTD-4W-80 4-wire 2 (80) 1 singles 2 bare), 4 wires SA1-RTD-4W-120 4-wire 3 (120) SA1-RTD-4W-TA4F 4-wire 1 (40) TA4F connector pins 1 and 2, SA1-RTD-4W-80-TA4F 4-wire 2 (80) common 3 and 4 common SA1-RTD-4W-120-TA4F 4-wire 3 (120) Ordering Examples: SA1-RTD-80-MTP, Class A, surface-mount RTD sensor, 3-wire leads, 2 m (80 ) lead-wire length with a miniature 3-pin MTP connector. SA1-RTD-4W-80-TA4F, Class A, surface-mount RTD sensor, 4 wire leads, 2 m (80 ) lead-wire length with a 4-pin audio-style connector. For special lengths, add additional cost. For the -SB option, add additional cost. C-108 Thin-Film RTDs Ensure Trouble-Free Connection to Flat or Curved Surfaces. Perfect for High-Vibration Environments Make Your Sensor Into a Complete Measurement System