Cam Positioner 3F88L-160/-162 CSM 3F88L-160 -162 DS E 2 2 Faster, More Advanced Rotational Control for Greater Precision and Improved Productivity High speed and high precision double machine productivity. Compact design saves space. Simple operations and settings match cam outputs to the rotational angles. UL/CSA listing and EC Directive compliance ensure worldwide application. Many convenient onsite functions. System Configuration Cam Positioner 3F88L-160/162 Resolver Resolver Extension Cable 3F88L-RS17/-RS17T Programmable Controller 3F88L-CR C SYSMAC CS Series SYSMAC CJ Series, Others Resolver Cable Resolver Cam Output Cable 3F88L-CR NA 3F88L-RS15 3F88L-CG S Display Unit M7E Cam Output Resolver Connector Connector Resolver Cable 3F88L-CR SA Resolver Display Unit 3F88L-RS15W M7F* * Display Unit M7F-series was discontinued at the end of March 2016. Ordering Information Name Model Name Model Cam Positioner 16 outputs 3F88L-160 RS15 Resolver Cable with Connectors on 3 m 3F88L-CR003NA Both Ends 32 outputs 3F88L-162 5 m 3F88L-CR005NA Resolver Shaft: 10 dia. Standard model 3F88L-RS17 10 m 3F88L-CR010NA High-torque model 3F88L-RS17T 15 m 3F88L-CR015NA Shaft: 6 dia. Connector type 3F88L-RS15 20 m 3F88L-CR020NA Lead-wire type 3F88L-RS15W RS15W Resolver Cable with Connector 3 m 3F88L-CR003SA on One End Resolver Extension Cable with 2 m 3F88L-CR002C 5 m 3F88L-CR005SA Connectors on Both Ends 5 m 3F88L-CR005C 10 m 3F88L-CR010SA 10 m 3F88L-CR010C Cam Output Cable with Connector on 1 m 3F88L-CG001S One End 20 m 3F88L-CR020C 3 m 3F88L-CG003S 13F88L-160/-162 Specifications General Specifications Item Model 3F88L-160 3F88L-162 Supply voltage 100 to 240 VAC, 50/60 Hz Allowable supply voltage 85 to 264 VAC Power consumption 27 VA max. Inrush current 40 A at 10 ms max. I/O power supply 145 mA at 24 VDC Allowable I/O supply voltage 20.4 to 26.4 VDC Insulation resistance 20 M min. between all external AC power supply terminals and the protective ground terminal (at 500 VDC) * Dielectric strength 2,300 VAC at 50/60 Hz for 1 min between all external AC power supply terminals and the protective ground terminal (leakage current: 10 mA max.) * Noise immunity IEC 61000-4-4: 2 kV power line Vibration resistance Conforms to JIS C0911: 10 to 57 Hz with 0.075-mm single amplitude 80 min each in X, Y, and Z directions, 2 57 to 150 Hz at 9.8-m/s acceleration (sweeps: 8 min 10 sweeps = 80 min total) 2 Shock resistance Conforms to JIS C0912: 147 m/s three times each in X, Y, and Z directions Ambient operating temperature 0 to 55C Ambient operating humidity 10% to 90% (with no condensation) Ambient operating atmosphere No corrosive gases Ambient storage temperature 20 to 75C Terminals screw size Power supply input: M3.5, control I/O: M3 Momentary power interruption Does not detect momentary power interruptions lasting less than 15 ms. detection time Dimensions 110 100 82.5 mm (W H D) Weight 1 kg max. Structure Mounted inside panel Mounting method Screw mounting (two M4 screws) or DIN Track mounting * Disconnect the functional ground terminal from the protective ground terminal before performing insulation resistance or dielectric strength tests. Characteristics Item Model 3F88L-160 3F88L-162 No. of outputs 16 32 Output performance Open-collector output, maximum switching capacity: 300 mA at 26.4 VDC (1.6 A max. per connector) No. of banks 8 banks at 360 resolution, 4 banks at 720 resolution Display 7-segment LED (current bank, speed, current angle) Response speed 1,600 r/min at 360 resolution, 800 r/min at 720 resolution Detection cycle 100 s max. Reproducibility 0.2 Memory backup No. of non-volatile memory (EEPROM) writes: 100,000 times Control unit 1/360 at 360 resolution, 1/720 at 720 resolution Origin compensation 1 to 359 at 360 resolution, 1 to 719 at 720 resolution Backlash compensation 1 to 179 at 360 resolution, 1 to 359 at 720 resolution Advance angle compensation Advance angle compensation Range:1 to 359 at 360 resolution, 1 to 719 at 720 resolution Speed input range: 1 to 1,600 at 360 resolution, 1 to 800 at 720 resolution Note: Only zero will be accepted for the angle advancement input when the speed input is zero. Control inputs START, TRIG, BANK 1 to 3, and RESET Photocoupler input impedance: 4.7 k Control outputs RUN, ERROR, and MDET Open-collector output, maximum switching capacity, 300 mA at 26.4 VDC Speed detection accuracy 5 r/min max. 2