44531-0260 Omron

Safety interlock Switches MC-S mc-S Series Rev. 9.10 compact coded magnetic Safety interlock Switch and control Unit Dual channel, fully monitored system meets Category 3 when single MC-S Series switch and control unit are used MC-S6 meets Category 4 External Device Monitoring (EDM) with automatic or manual reset NEMA 6 switch enclosures in plastic or stainless steel with connector satisfy most application requirements Magnetically coded switches are tamper resistant to common magnets Misalignment tolerance of (5 and 9 mm) reduces nuisance tripping A large number of switches may be used with a MC-S Series control unit MC-S6 control unit provides individual monitoring and indication for up to 6 switches and a N/O delayed output Mechanical interlock switches may be used with a MC-S Series control r MC-S Series controls may replace a safety relay in some applications C US g Conforms to EN954-1, EN1088, EN60204-1 Auxiliary contacts available for individual guard door monitoring on MC-S switches UL and C-UL listed Actual Size Description The MC-S Series is a tamper t ype 1 Sensor t ype 2 Sensor 0.75 in resistant non-contact switch 19 mm 1.89 in. that operates with its own 48 mm control unit. As a fully monitored dual channel system, a single MC-S Series switch and MC-S Series Control Units 1 or 2 .98 in. combine to fullfi l Category 3 25 mm requirements. Control Unit 6 with 2 to 6 MC-S switches fullfi ls Category 4 requirements for the 3 N/O outputs and Category 3 MC S Series MC S Series for the N/O delayed output. The Control Units provide EDM (External Device 3.23 in Monitoring, also called MPCE 82 mm monitoring) with an automatic or manual reset. This allows the Control Units to replace a safety relay in some applications. The NEMA 6 encapsulated IP 67 IP 67 design makes it ideal for harsh MADE IN EC MADE IN EC environments. The Control Units can be used with a large number of MC-S switches for applications with multiple guard doors. The Control Unit provides individual monitoring and LED indication for up to six MC-S switches. Mechanical switches and MC-S switches may be used together with a single MC-S Control Unit for applications requiring both non-contact and mechanical safety interlock switches. Omr On Scientific technOlOgieS, inc. For the Latest Information g1 USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.commc-S Series Safety interlock Switches Operation Operating Principle connector configurations On presenting the actuator to the switch, mc-SS2 Stainless Steel the coded, high intensity magnetic efi ld MC S Series 8-Pin Male, from the actuator causes the contacts to Micro DC, M12 close. On removing the actuator (opening N/C SWITCH the door), the safety contacts open, isolat- Blue Red IP 67 ing the machine. M12 MADE IN EC Green (ground) Grey N/O Yellow Black White Auxiliary Circuit - not for safety use (N/O or N/C) mounting examples 8-Pin Female, Micro DC, M12 INCLUDED CABLE Red Blue M12 Operation: target face to target face Grey Green White g Black Yellow 8-Pin Female, Micro DC, M12 ACCESSORY CABLE 44512-0620 contact Arrangements White Brown M12 NOTE: ACTUATOR MUST NOT STRIKE SENSOR Blue Guard Stops Red Green Pink MC-S 9 Grey Yellow Type 2 5 Type 1 & 3 Misalignment Tolerance (when mounted min 1mm mc-S3 on non- ferrous materials). 0mm max 3mm - type 1 & 3 3 4 max 4mm - type 2 Misalignment 4-Pin Male, tolerance (mm) Micro DC, M12 Recommended gap between sensor and actuator. SWITCH Safety Circuit 1 (N/C) 12 11 M12 2 1 3 4 Safety 33 34 Circuit 2 (N/O) 4-Pin Female, Micro DC, M12 ACCESSORY CABLE 44512-0600 Brown White M12 Universal Mounting Brackets 1 2 can be used with this product. 4 3 See accessories on www.sti.com Black Blue Omr On Scientific technOlOgieS, inc. For the Latest Information g2 USA Tel. 1/888/510-4357 canada Tel. 1/866/986-6766 On the Internet: www.sti.com Face to face distance (mm)