Conductive Level Controller 61F-D21T-V1 CSM 61F-D21T-V1 DS E 1 1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment of operating resistance from 10 to 100 k for application to a wide range of liquids. Delay timer to prevent relay contact chattering caused by waves. Models with a wide AC power supply range (100 to 240 VAC) and 24 VAC/DC reduce the number of level controller models kept in stock. CE marking, cUL recognized. Easy wiring with ferrules 2 2 2 2.5 mm solid or 2 1.5 mm standard ferrules. Model Number Structure Model Number Legend 61F- 123 1. Basic Model 61F: Conductive Level Controller 2. Functions D21T-V1: Automatic liquid supply operation/ Automatic liquid drainage operation 3. Supply Voltage 24 VAC/DC: 24 VAC/DC 100-240 VAC: 100 to 240 VAC 161F-D21T-V1 Ordering Information List of Models Conductive Level Controller Supply voltage Model 24 VAC/DC 61F-D21T-V1 24 VAC/DC 100 to 240 VAC 61F-D21T-V1 100 to 240 VAC Specifications Rated voltage 24 VAC, 50/60 Hz, or 24 VDC 100 to 240 VAC, 50/60 Hz Operating voltage range 85% to 110% of rated voltage Voltage between electrodes 6 V p-p (approx. 20 Hz) Power consumption 24 VDC: 2 W max. 24 VAC: 4 VA max. 100 to 240 VAC: 5 VA max. Operating resistance 10 k to 100 k (variable) Reset resistance 250 k max. Response time Approx. 0.1 to 10 s (variable) 2 Cable length 100 m max. with completely insulated (600 V) cabtire cable with 3 conductors (0.75 mm ) Control output 6 A at 250 VAC for resistive load at 20 C, 1 A at 250 VAC for inductive load cos = 0.4 at 20 C Indicators Green LED: Power, Yellow LED: Control output Ambient temperature Operating: 20 to 60 C, Storage: 30 to 70 C (with no condensation or icing) Ambient humidity Operating: 25% to 85%, Storage: 25% to 85% Elevation 2,000 m max. Insulation resistance 100 M min. (at 500 VDC) between power supply section, electrode section, and contact section Dielectric strength 2,000 VAC 50/60 Hz for 1 min between power source section, electrode section, and contact section 2 Vibration resistance Vibration of 10 to 55 Hz and acceleration of 50 m/s for 5 min. 10 times each in X, Y, and Z directions 2 Shock resistance 100 m/s 3 times each in 6 directions on 3 axes Installation environment Overvoltage Category II, Pollution Degree 2 Safety standards EN61010-1 EMC EN61326 Industrial applications 2