- A16 -P Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) PCB Terminal Models Lever made of high heat resistant resin allowing automatic soldering. Easy Panel and PCB mounting. Lever for easily mounting and removing the Switch. The hold status can easily be checked from the rear of the PCB. Short profile width of the separable type reduced to 28.3 mm. A Panel width can also be reduced. 1 6 RoHS Compliant P Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety Precautions on page 3. List of Models Ordering as a Set......... The model numbers used to order sets of Units are given in the following tables. One set comprises the Pushbutton, Lamp (lighted models only), Case, and Switch. Models with PCB Terminals IP40 Item Minimum Momentary operation (Self-resetting) *1 Pushbutton color symbol packing unit Output Lighting Operating voltage 5 VDC A16L- M-5D-1P LED 12 VAC/VDC A16L- M-12D-1P SPDT R: red 24 VAC/VDC A16L- M-24D-1P Y: yellow PY: pure yellow Non-lighted A16- M-1P G: green 5 pcs 5 VDC A16L- M-5D-2P A: blue W: pure white LED 12 VAC/VDC A16L- M-12D-2P DPDT B: black *2 24 VAC/VDC A16L- M-24D-2P Non-lighted A16- M-2P Note: Contact your OMRON representative about Selector Switches and Key Selector Switches. *1. Enter the desired shape for the Pushbutton in : J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the . *2. Black (B) Pushbuttons are only available for non-lighted models. Models with PCB Terminals IP66 Item Minimum Momentary operation (Self-resetting) *1 Pushbutton color symbol packing unit Output Lighting Operating voltage 5 VDC A165L- M-5D-1P LED 12 VAC/VDC A165L- M-12D-1P SPDT R: red 24 VAC/VDC A165L- M-24D-1P Y: yellow PY: pure yellow Non-lighted A165- M-1P G: green 5 pcs 5 VDC A165L- M-5D-2P A: blue W: pure white LED 12 VAC/VDC A165L- M-12D-2P DPDT B: black *2 24 VAC/VDC A165L- M-24D-2P Non-lighted A165- M-2P Note: Contact your OMRON representative about Selector Switches and Key Selector Switches. *1. Enter the desired shape for the Pushbutton in : J (rectangular), A (square), or T (round). Enter the desired color symbol for the Pushbutton in the . *2. Black (B) Pushbuttons are only available for non-lighted models. 1- A16 -P Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Specifications Approved Standard Ratings Characteristics UL, cUL (File No. E41515) Type Pushbutton Switch Item 5 A at 125 VAC, 3 A at 250 VAC (general use) Momentary operation: 120 operations/minute max. Allowable Mechanical 3 A at 30 VDC (resistive) operating Alternate operation: 60 operations/minute max. *1 frequency Electrical 20 operations/minute max. *1 Note: Certification has been obtained for the Insulation resistance 100 M min. (at 500 VDC with insulation tester) Switch. Contact resistance (initial value) 100 m max. TV (EN60947-5-1) Between terminals of 1,000 VAC, 50/60 Hz for 1 minute same polarity (Low Voltage Directive) Between terminals of 2,000 VAC, 50/60 Hz for 1 minute 3 A at 250 VAC different polarity Dielectric strength 3 A at 30 VDC Between each 2,000 VAC, 50/60 Hz for 1 minute terminal and ground CCC (GB14048.5) Between lamp 1,000 VAC, 50/60 Hz for 1 minute *2 5 A at 125 VAC terminals Vibration 3 A at 250 VAC A Malfunction 10 to 55 Hz, 1.5-mm double amplitude (malfunction within 1 ms) resistance 1 3 A at 30 VDC 2 Shock Destruction 500 m/s 6 2 resistance Malfunction 150 m/s max. (malfunction within 1 ms) Ratings Momentary operation: 2,000,000 operations min. Mechanical P Alternate operation: 200,000 operations min. *1 Durability Contacts Electrical 100,000 operations min. *1 Rated voltage Resistive load Electric shock protection class Class II 125 VAC 5 PTI (tracking characteristic) 175 Degree of contamination 3 (IEC60947-5-1) 250 VAC 3 Approx. 12 g (in the case of a lighted DPDT switch with solder Weight 30 VDC 3 terminals) Note: Minimum allowable load: Ambient operating temperature 10C to +55C (with no icing or condensation) 5 VDC 1 mA (Resistive) Ambient operating humidity 35% to 85%RH The ratings given above are for testing Ambient storage temperature 25C to +65C (with no icing or condensation) under the following conditions: *1. Set and reset constitute one operation. (1) Ambient temperature: 20 2C *2. With LED and incandescent lamp not mounted. (2) Ambient humidity: 65 5%RH (3) Operating frequency: 20 times/minute Operating Characteristics Contact Form Type IP40 Oil-resistant IP66 Characteristics Name Contact Operating force OF max. 4.41 N 4.91 N Release force RF min. 0.29 N NC SPDT Total travel TT Approx. 3mm COM NO Pretravel PT max. 2.5 mm Locktravel alternate LTA min.* 0.5 mm * Alternate operation models only. Dimensions (Unit: mm) 28.3 Rectangular A16 -J - P 9.5 26.4 6 PCB terminals 23.1 21.1 10.8 4 2.5 18.4 20.4 6.3 0.5 Lock ring Mounting nut 18 15.1 4.85 12.4 18.6 0.5 21 Packing (t0.5) 24 (for oil-resistant IP66 only) The Dimension shows 1-switch output. The lamp terminal is also provided with non-lighted models. A rectangular model is listed as an example. Unless specified, there is a tolerance of 0.4mm for dimensions. 2