Common Accessories and Tools A22NE-PD A22NE-P A22E Common Note Emergency Stop Pushbutton Switches (22-dia. or 25-dia.) A22NE-PD/A22NE-P/A22E Install in 22-dia. or 25-dia. Panel Cutout (When Using a Ring) A wide variety of Emergency Stop Pushbuttons for all type of applications. Lock lever design provides quick and easy installation. Available vibration resistant terminals (A22NE-P & A22NE-PD). Use 25-dia. ring to install in 25-dia. panel cutouts. * Lock detection function provides an added level of safety by minimizing emergency stop button failures from improper installation and damage. * Switches with an IP69K degree of protection do not support the 25-dia. Be sure to read theSafety Precaution on pages 17, 33, 50, and 56. Premium - Lock detection and Vibration resistant Page 2 A22NE-PD Push-in Plus Terminal Block Types Mid-grade - Vibration Resistant Page 16 A22NE-P Standard Page 32 A22E Screw Terminal Block Types 1Common Accessories and Tools A22NE-PD A22NE-P A22E Common Note Emergency Stop Pushbutton Switches (22-dia. or 25-dia.) Push-in Plus Terminal Block Models With Lock detection A22NE-PD Install in 22-dia. or 25-dia. Panel Cutout (When Using a Ring) Push-in plus terminals greatly reduce wiring effort and provide vibration resistant connections. A maximum of up to four contact points can be combined together in the contact-point configuration. Oil-resistant to IP65 (non-lighted models) / IP65 (lighted models) / IP69K high-temperature, high-pressure cleaning (pull-reset models). Lock Detection function disconnects circuit when the switch For the most recent information on models that have been lock lever becomes unlocked from damage or improper certified for safety standards, refer to your OMRON website. installation. Be sure to read theSafety Precaution on pages 12 and 56. Model Number Structure Model Number Legend (Completely Assembled)........Shipped as a set which includes the Operation Unit, LED Lamp (lighted models only), and Switch Block. 132 4 5 67 A22NE- -PD - - 1. Operation Unit size (diameter) 5. Contacts Code Description Contacts S 30 dia. Number of Code Contacts NC NO M40 dia. 01 one contact 0 1 L60 dia. two contacts 02 0 2 11 1 1 three contacts 2. Reset function 03 0 3 21 2 1 Code Description 12 1 2 None Turn-reset four contacts 22 2 2 P Pull-reset * 13 1 3 * The pull-reset type is only available on the 40 dia. 04 0 4 Operation Unit, non-lighted type. Not available on lighted types. Note. NO: 1a-contact NC: 1b-contact 3. Terminal specification Code Description 6. LED lamp voltage P Push-in plus terminal block Code Description N Non-lighted 24 VAC/VDC C 4. Lock lever function * Lighting color is red. Code Description D Lock-lever-linked contact function 7. Others (Degree of Protection) Code Description None IP65 IP69K * 69K * IP69K is supported only by the Pull-reset models. 2