Thumbwheel Switch A7D/A7DP CSM A7D A7DP DS E 6 1 Ultra-small, Low-cost, Push-operated Switches All-in-one design means fewer parts are required. This product delivers high reliability at a low cost. Uses long-lasting resin springs to achieve a long mechanical durability expectancy of 30,000 operations. Models with stoppers for restricting the setting range are available. The series includes a complete range of pen-push models that prevent accidental operation. Ordering Information Switches (Single Switch Units) Model A7D A7DP Screw mounting (back mounting) Snap-in (front mounting) Snap-in (front mounting) Classification (See note 1.) Terminals PCB terminals Output code number Color Light gray Black Light gray Black Light gray Black 06 (binary coded decimal) A7D-106 A7D-106-1 A7D-206 A7D-206-1 A7DP-206 A7DP-206-1 Note: 1. The classification diagrams show 4 Switch Units combined with End Caps to create 4-digit displays. 2. The model numbers given above are for 1 Switch Unit. 3. Models with stoppers are also available. Add -S after the 106 or 206 in the model number and specify the display range in the . For example, to specify the range 0 to 6, add -S06 to the model number (e.g., A7D-106-S06-1). 4. Models with +, - displays are also available. Add -PM after the 106 or 206 in the model number (e.g., A7D-106-PM or A7D-106-PM-1). Accessories (Order Separately) Use accessories, such as End Caps and Spacers, with the Switch Units. Classification Screw mounting (back mounting) Snap-in (front mounting) Accessory Color Light gray Black Light gray Black End Caps (1 pair) A7D-1M A7D-1M-1 A7D-2M A7D-2M-1 A7D-1P A7D-1P -1 A7D-2P A7D-2P -1 Spacer (See note.) (See note.) (See note.) (See note.) Note: The in the Spacer model number stands for a letter in the range A to U. (Refer to the table in the following explanation about Spacers.) End Caps End Caps are used on the Switch Units at each end and allow all the Switch Units to be securely mounted to a panel. They come in pairs, one for the left and one for the right. Spacers Spacers are used for creating extra space or gaps between the Switch Units and have the same dimensions as the Switch Units themselves. There are also Spacers with engraved characters or symbols that can be used for indicating units, such as time and length. (Refer to the following table.) Consult your OMRON representative for details. Symbol A B C D E F G No desig- Stamp SEC MIN H g kg mm nation Symbol H J K L Q T U x 10 Stamp cm m CPCS 0 SEC 1A7D/A7DP Specifications 3.3 to 30 VDC Switching capacity (resistive load) 1 mA to 0.1 A Continuous carry current 100 mA Contact resistance 200 m max. Between non-connected 10 M min. (at 250 VDC) terminals Insulation resistance Between terminal and 100 M min. (at 500 VDC) non-current carrying part Between non-connected 250 VAC, 50/60 Hz for 1 min terminals Dielectric strength Between terminal and 1,000 VAC, 50/60 Hz for 1 min non-current carrying part Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance 500 m/s min. Mechanical 30,000 operations min. Durability Electrical 20,000 operations min. Operating: 10C to 70C (with no icing) Ambient temperature Storage: 20C to 80C Ambient humidity Operating: 45% to 85% Max. operating force 3.43 N max. Dimensions (Unit: mm) Switches A7D-106(-1) Number of Size A Size B Size C Size D PCB Terminals Switches (n) (n x 5.1 + 3) (n x 5.1 + 8.3) (n x 5.1 + 13.3) C 17 1.6 1.5 1 8.1 13.4 18.4 8.4 B 2 3.7 2 13.2 18.5 23.5 13.5 A 4.2 0.1 5.08 1.92 3 18.3 23.6 28.6 18.6 4 23.4 28.7 33.7 23.7 2.8 8 P=2.54 4 2.2 2 0.15 5 28.5 33.8 38.8 28.8 16 140.1 10 1.4 14 1 C 6 33.5 38.9 43.9 33.9 0.8 7 38.6 44.0 49.0 39.0 PCB terminal 1.5 8 43.7 49.1 54.1 44.1 Panel thickness: 2 9 48.8 54.2 59.2 49.2 Panel Cutout 10 53.9 59.3 64.3 54.3 Note: 1. The dimensions above include both End Caps, and +0.4 14.2 will increase 5.08 mm for each Spacer inserted. 0 2. Unless otherwise specified, a tolerance of 1.85 1.5 0.4 mm applies to all dimensions. +0.3 0.3 (2.2) D P=5.08 0 The tolerance for multiple connection is Two, M2.6 or B 2.8 mm holes (number of units x 0.4) mm. Note: Common terminal C is at the bottom when the Switch Unit is viewed from the front. A7D-206(-1) Number of Size A Size B Size C PCB Terminals Switches (n) (n x 5.1 + 5) (n x 5.1 + 3) (n x 5.1 + 3.9) 17.5 110.1 8.1 9 1.5 1.5 3.7 A 3.7 2 15.2 13.2 14.1 (2.5) 5.080.1 1.92 3 20.3 18.3 19.2 4 25.4 23.4 24.3 8 P=2.54 4 2.2 2 0.15 5 30.5 28.5 29.4 16 10 14 1 C 6 35.5 33.5 34.5 0.8 1.4 7 40.6 38.6 39.6 1.5 PCB terminal 8 45.7 43.7 44.7 Panel thickness: 1 to 2 9 50.8 48.8 49.8 Panel Cutout 10 55.9 53.9 54.9 Note: 1. The dimensions above include both End Caps, and +0.4 14.2 0 will increase 5.08 mm for each Spacer inserted. 2. Unless otherwise specified, a tolerance of (1.5) 0.4 mm applies to all dimensions. +0.3 C 0 (2.2) The tolerance for multiple connection is 0.3 P=5.08 B (number of units x 0.4) mm. Note: Common terminal C is at the bottom when the Switch Unit is viewed from the front. 2