Ultra subminiature Pushbutton Switch A9PS Ultra subminiature size. Gold-plated clip contact ensure high reliability. The sealed bottom prevents flux penetration. Washable, equivalent to IP64 (IEC-60529). A9PS is smaller than A9P. Height: A9P 13.3mm, A9PS 10.5mm (30% smaller than A9P) RoHS Compliant Typical Applications Security Control Boards Electric Power Instrumentation Program Controllers List of Models Terminal Shape DIP Terminal Right Angle Terminal Vertical Mount Terminal Switching Functions SPST DPST SPST DPST SPST DPST OFF (ON) A9PS16-0011 A9PS26-0011 A9PS16-0012 A9PS26-0012 A9PS16-0013 A9PS26-0013 Quantity per tray 100 25 50 Note: (ON) shows Momentary. Caps Available wide range og colors. Colors White Black Blue Green Yellow Red Models A9PS-011 A9PS-021 A9PS-041 A9PS-051 A9PS-061 A9PS-071 4 dia. Dimension 2.4 Dimension with the cap. 3.8 2.4 4 dia. 1A9PS A9PS Ratings/Characteristics Rating (resistive load) 14 mA at 28 VAC/DC, 0.1 A (minimum current) at 20 mVAC/DC Ambient operating temperature 20 C to +80 C 60% RH max. (with no icing or condensation) Ambient operating humidity 45 to 85% RH (at +5 to +35 C) Insulation resistance 500 M min. (at 500 VDC with insulation tester) Contact resistance (initial value) 80 m max. Dielectric strength 500 VAC for 1min between terminals, between terminals and ground Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Malfunction 500 m/s min. Durability Mechanical 50,000 operations min. Electrical 50,000 operations min. Degree of protection IEC IP64 Washing Possible Operating forcse 4.9 N max. Weight 0.3 g Dimensions (Unit: mm) DIP Terminal Models 1.6 (5.6) 2.54 3.3 0.3 0.45 0.2 (6) (3) (6) (3) 5.08 7 2 dia. (4) (1) (4) (1) Stroke 1 Single Pole Type Double Pole Type Marking Side Note: NO.(4) and (6) terminals in the SPDT models are dummys to support the Switch case. Right Angle Terminal Models 1.6 (5.6) 3.3 0.45 0.2 (3) (6) (3) 2 dia. 5.08 7 (1) (4) (1) Stroke Single Pole Type Double Pole Type 1 Marking Side 0.3 2.6 3.1 5.08 2.54 Note: Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. 2