Z/A/X/DZ Common Accessories
Ordering Information
Terminal Covers (Sold Separately)
Common to Z, A, X, and DZ Models
The Terminal Cover is secured using the switchs side mounting screws and protects the casing and terminal wires from dust, vibration, or fingers,
thus preventing terminal short-circuiting, ground faults, wire disconnection or improper connection, and electric shock accidents.
Terminal Covers made of phenol resin have five or six thin wall sections.
These sections can be torn open to provide holes for lead cables at desired points.
Application Soldering terminal use Screw terminal use
Remarks
Material Mounting direction Model
Phenol resin Side mounting AP-A AP-B ---
Metal press mold Side mounting AP1-A AP1-B Used for AP-A and AP-B
Vinyl chloride Side mounting AP-Z ---
Note: Use the Screw-terminal use Terminal Cover for DZ-series solder terminal models.
Separator (Sold Separately)
Common to Z, A, X, and DZ Models
Model: Separator for Z
Actuators (Sold Separately)
Common to Z and X Models
Pin Plunger Switches might need to be actuated by a cam or similar object, in which case, use one of the following Actuators according to the application.
Actuator Common to Z and X models
Hinge lever
ZAA-1
Hinge roller lever
ZAA-2
Short ZAQ-3
Panel mount plunger
Medium ZAQ-2
Long ZAQ-1
Panel mount roller plunger
ZAQ-22
Note: ZAQ-22 is constructed of ferrous material. Therefore, it cannot be used with the X Switch, because of the permanent magnet contained
within those models. Use the ZAQ-22 external panel mount roller plunger only with the Z or DZ switch.
Z/A/X/DZ Common Accessories 177Dimensions
Note: Unless otherwise specified, all units are in millimeters and a tolerance of 0.4 mm ( 0.8 mm for the AP-Z) applies to all dimensions.
Terminal Covers
52.8 53.8
AP-A AP-B
+0.2 +0.2
25.4
+0.2 +0.2 4.3 4.3
25.4 0 0
4.3 4.3
0 0
Soldering Terminal Use Screw Terminal Use
(Phenol Resin) (Phenol Resin)
8
8
16.3 20.2
2.15R
2.15R
6.4
6.5
8 21
8 21
Note: The Cover has five thin, easy-to-separate Note: The Cover has six thin, easy-to-separate
portions for easy lead wire connections. portions for easy lead wire connections.
54.4
55.4
AP1-A
+0.2 +0.2 AP1-B
25.4
4.3 4.3 +0.2 +0.2
25.4
0 0 4.3 4.3
0 0
Soldering Terminal Use
Screw Terminal Use
(Metal Press Mold)
8 (Metal Press Mold)
8
17.1
21
2.15R
2.15R
7.2
7
8.5 22.6
8.5 22.6
Note: 1. The Cover has five holes for easy lead wire connections.
Note: 1. The Cover has six holes for easy lead wire connections.
2. AP1-A should be used with the AP-A
2. AP1-B should be used with the AP-B
Two, 4.2 dia.
AP-Z
Pressure plate
53
(t1 steel)
Soldering or Screw Terminal Use
21 25.4
Cable Pull-out Dimension
(Vinyl Chloride)
7
A-A' cross-section B-B' cross-section
14
15 8 dia. 13 6 dia.
21
39
46
Note: A 6-dia. or 8-dia. cable can be
used by cutting the cable pull-out
hole to the size of the cable to be
A A'
used.
B B'
12 M3 20 Phillips screw 12
Nut
(with plane washer and nut)
14
Separator
SEPARATOR FOR Z
Two, 4.5 dia.
Note: The separators material is EAVTC (Epoxide Alkyd
Varnished Tetron Cloth) and its heat-resisting
13.5
temperature is 130 C.
27
11.9
25.40.2
t = 0.38
49.20.5
178 Z/A/X/DZ Common Accessories