CJ-series Power Supply Unit CJ1W-PA/PD CSM CJ1W-PA PD DS E 5 1 Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W). CJ1W-PA205C CJ1W-PA202 Stable power supply is available from the CJ-series CPU Unit to each I/O Units via the dedicated bus. The most suitable Power Supply Unit can be selected among various I/O specifications and/or options. Features The replacement notification function can prevent an overflow of the system due to the power lifetime. (CJ1W-PA205C only) Power Supply Unit provides wide variations according to the system scale up to maximum 25 W. Power Supply Unit provides wide variations according to the power supply (100 to 240 V AC/ 24 V DC) status. The output contact during operation enables you to check the CPU operation. (CJ1W-PA205R only) Conforming to the SEMI-F47 Standard. * * AC input type, 200 V min. input. 1CJ1W-PA/PD Ordering Information International Standards The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards. Power Supply Units Output capacity Options 24-VDC Power supply 5-VDC 24-VDC Maintenance Product name Model Standards Total power service RUN voltage output output forecast consumption power output capacity capacity monitor supply No Yes CJ1W-PA205C 5 A 0.8 A 25 W AC Power 100 to 240 Supply Yes No CJ1W-PA205R VAC Unit UC1, N, L, CE No 2.8 A 0.4 A 14 W No No CJ1W-PA202 5A 0.8 A 25 W No No CJ1W-PD025 DC Power Supply 24 VDC Unit 2 A 0.4 A 19.6 W No No CJ1W-PD022 UC1, CE Note: This unit cannot be used with the Machine Automation Controller NJ-series. Accessories There is no accessory for the CJ series Power Supply Unit. 2